Rotator welding vertical M21070
- Customer pickup,
- Courier
- In detail
(View map)
- Country of manufactureUkraine
The welding equipment is intended for rotation of products around a vertical axis with a welding speed at automatic arc electric welding of circular seams under gumboil or in the environment of protective gases or their installation in a comfortable position at a mid-flight speed at semi-automatic or manual welding.
Rotator bed welded. On a table the drive of rotation of the faceplate consisting of the electric motor and a worm and cylindrical reducer is mounted. The rotator is supplied with the device for an automatic stop after the end of welding of a circular seam with overlapping. The product fastens on the faceplate with T-shaped grooves by means of fastenings. The design of a spindle provides a possibility of a supply of compressed air when fastening of the welded product on the faceplate or in adaptation.
The electrical accessories of management are placed in a separate case.
Management push-button from the separate panel.
Technical characteristic
The greatest torque on an axis of rotation of the faceplate, N*m |
5000 |
The largest loading capacity, kg |
6300 |
The largest diameter of the welded product at horizontal position of an axis of rotation, mm |
1800 |
Number of degrees of freedom of working body |
1 |
The greatest angle of rotation of the faceplate, degree |
360 |
Frequency of rotation of the faceplate for providing welding speeds of rpm |
0,036... 1,8 |
The greatest deviation of welding frequency of rotation from established with the largest frequency of rotation |
4% |
Rated welding current, And at PV of 100% |
1000 |
Sort of current of a power line |
variable three-phase |
Frequency of current, Hz |
50 |
Tension, In |
380 |
Sort of current of the electric drive of rotation of the faceplate |
variable from the converter of frequencies |
Tension of the electric drive of rotation of the faceplate, In |
380 |
Nominal frequency of rotation of a shaft of the electric motor of rotation of the faceplate, rpm |
1450 |
Power of the electric motor of rotation of the faceplate, kW |
3.0 |
Overall dimensions, mm |
1300х1250х900 |
Mass of a rotator, kg no more |
1200 |