Roar vibration GIP4-0,15P suspended figurative type

TECHNICAL DATAS

Name of parameter	Value
Power of the electric motor, kW	0,11
Synchronous shaft speed of the engine, RPM.	3000
Quantity of the sifting surfaces	4
Working area of each sieve, sq. m.	0.15
Roar box vibratory frequency, stake/sec.	50
Amplitude of oscillation of a box of a roar, mm	1 … 5
Tilt angle of the sifting surfaces	8 ° … 14 °
The size of cells sit, mm	4; 2; 1; 0.5
Diameter of branch pipes of a divider, mm	40
Mass of a product, kg, no more
The general	40
Frame	10
Roar with an overhead equipment	30
Diameter of branch pipes of a divider, mm	40
Leading dimensions of a product, mm, no more:
Length	1490
Width	640
Height (taking into account the drive)	1000

SHORT DESCRIPTION

The roar is intended for division of a source material into five a classifier grades a material to size ( + 4; - 4 + 2; - 2 + 1; - 1 + 0,5; - 0,5mm) before enrichment.
The operation principle of a roar consists in forced division of a source material into five classes ( + 4; - 4 + 2; - 2 + 1; - 1 + 0,5; - 0,5). Division happens at the movement of material on the shaker screen to a certain size of cells. Vibration is transferred to a sieve from the vibroactivator which is rigidly installed on a stretcher. At rotation of an eccentric shaft of the vibroactivator there is alternating centrifugal force operating on a set of the framework attached to a stretcher by means of latches and screw clips. The stretcher is hung on a folding frame by means of the adjusted and not adjustable spring blocks. An exit of a classified material is carried out through output branch pipes of a divider.