Heat generator TGA-800
- Customer pickup,
- In detail
- Country of manufactureBelarus
- TypeSolid fuel
- Installation methodFloor standing
- Profile4,*3,3*3,9 m
TGA heat source 800 for heating to 120 of C. Outside fuel combustion products and supplying clean hot air into the dryer, heating of production premises, wood drying.
Heat generator TGA - 800 consists of:
- the body, inside which there is a firebox with an afterburner, lined with cast iron panels,
- gas - air heat exchanger, consisting of fire and smoke tube bundles.
The air is supplied to the heat exchanger by two coupled electric fans of the VTs or VR type.
Fuel (round timber, blocks) is loaded manually through the firebox loading loop. Logs up to 0.8 m long are stacked on a slide, transversely to the firebox, (one - time loading 350 kg).
The centrifugal smoke exhauster is driven into rotation by an asynchronous electric motor and provides a minimum vacuum in the furnace (not higher than 20 Pa), pumps flue gases through the flame and smoke tube bundles and removes combustion products through the chimney.
Adjustment of the flue gas flow rate is carried out depending on the heat output of the TG by a two - channel thermostat of the Sosna - 003 type of Belarusian production, operating with 2 measuring transducers (sensors), one of which is installed at the outlet of the TG of heated air, and the other in the flow of flue gases . . .
The temperature of the heated air is automatically controlled by turning on or off the smoke exhauster, the temperature of the flue gases is monitored by the operator visually on the thermostat display and serves as an additional indication for him to take measures to prevent the release of harmful combustion products into the atmosphere. The resulting combustion products from the afterburning chamber enter the heat exchanger (total heat exchange surface area of 150 m2) located behind the furnace and consisting of flame tubes, and from it into the rear rotary chamber. Then the stream of smoke makes a further movement along the labyrinth of smoke beams and heats up the streams of the main air and the air - oxidizer.Specifications:
|Indicator name||unit of measurement||Indicator value|
|Thermal power, not less||kw||800|
|Allowable temperature of air heating, no more||o C||120|
|Efficiency||%||85 - 90|
|Heated air supply, reduced to standard conditions (t = 20 o C, P = 101325 Pa), not less||m 3 / h||19000|
|Developed total pressure||kPa||1.4|
|Specific consumption of equivalent fuel at rated thermal power||kg / kW||0.15|
|Type of fuel||fuel||woodworking and logging waste, firewood (L = 0.8 m)|
|Installed power of electric motors, no more||kw||eighteen|
|Electrical circuit voltage||IN||220/380|
|Maximum one - time loading of firewood into the furnace, no more||Kg||350|
- height (without chimneys)
|Weight without mounting kit||Kg||8500