- Country of manufactureUkraine
Article 761Remkomplekt a tip of longitudinal draft (without finger) YuMZ
Insert (plastic) - 2
Cover - 1
to look on the official site
The steering is intended for providing and maintenance of the rectilinear movement, and also for change of the direction of the movement of a tractor by turn of its operated wheels. The steering consists of a trapeze of management, the steering drive and the steering mechanism.
The steering trapeze provides turn of the left and right operated wheels on different corners at which forward and back wheels turn rather general center of the turn located on continuation of an axis of back wheels. Thanks to it swing of wheels happens on concentric circles without lateral sliding.
The steering trapeze is formed by two cross steering drafts connected among themselves by a bipod, two rotary levers and a beam of the forward bridge.
Each steering draft consists of a connecting pipe and two tips, one of which with the left carving, another - with right.
Tips are screwed in carving openings of a pipe and fixed by lock-nuts. In a tip the spherical hinge consisting of a spherical finger and two inserts is placed (rubber and kapron). At plant the hinge is filled with the special long-term greasing which is not demanding replenishment in operation. The hinge is protected from hit of moisture, dust and dirt by a rubber cover and the rubber adjusting stopper which is drawing in hinge inserts. The conical ends of spherical fingers with a carving insert into openings of rotary levers and a bipod, drag on pro-carved nuts and shplintutsya.