Remdevice Brick radio control kit

Remdevice Brick radio control kit wholesale and retail from the manufacturer for export.

Push - button remote control 10 buttons for tower and bridge cranes.

Portable remote control 10 buttons / 2 speeds, mushroom button Emergency stop and transmitter power. Unique patented contactless fast charging system. Operating time on a single charge - 35 hours of continuous work. The ability to install a display on the radio control panel to display the weight of the lifted load and other necessary operating parameters of the crane.

GREAT ERGONOMICS

The specially developed design of the remote control for convenient operation, easy to hold and perform work operations. Optimal size (97x210x44mm) and light weight (470g). The buttons are designed in such a way that the remote control is easy to operate with work gloves (Ø21mm). Large and easy - to - read characters are visible even when you press the buttons.

SECURITY

BRICK radio remote controls comply with the standards of the 1st class EN 300220 - 1, which confirms the safety functions, the radio equipment is certified as highly reliable. The product is manufactured exclusively in Italy and complies with all relevant European directives regarding safety at work. The low power start function can be activated, which allows the remote control to start the crane only at close range to control a safe start. After starting, further work with the remote control is carried out at any distance. The transmitter power can also be reduced with decreasing range to increase the autonomy of the remote control.

LOW OPERATING COSTS

BRICK radio remote controls have a unique simple design. The number of parts is minimal, which means high reliability and quick and easy repairs!

If it is necessary to replace the remote control with a new one, thanks to the patented "REMSYS CODE" system, this process is easy and instant. A new replacement remote control can be activated for use with an existing radio control receiver by simply pressing the buttons on the remote control. There is no need to climb onto the crane and perform any manipulations with the receiver.

 

QUALITY AND RELIABILITY

The buttons are made of a special rubber compound that gives a high level of elasticity and durability even under the most difficult working conditions. All electronic and mechanical components are designed, built and tested to withstand extreme use in harsh environments; temperatures ranging from - 20 ° C to + 70 ° C, shocks and strong vibrations.

The nylon housing provides excellent shock and drop protection for the radio remote control, even in low temperatures. It is also resistant to acids, oils and chemicals, with an IP65 rating against dust and moisture.
BRICK can work in tandem with a radio remote control with PAIL joysticks.

 

RADIO CONTROLLER RECEIVER Brick

RxDIN - T7. The receivers are available in various formats, depending on individual requirements. Rx DIN T7 (pictured) is designed to be installed directly inside an electrical cabinet using a remote antenna. The RX - T7 outdoor sealed design is a compact ECOBOX.

RubyBox - T7. Fast and easy installation.

It is possible to change the frequency of the remote control using the transmitter with the tuning channel indicated by the LED. It is also possible to change the auto shutdown function, RF power level, close start function and auxiliary button function if necessary. The receiver does not require programming or setting by means of switches inside it!

MONITOR TESTER

The monitor tester instantly measures the signal / radio interference levels in the working area of the remote control. It can also be used to view the channel and frequency at which. the transmitter is programmed. It also shows the settings in the remote control and service diagnostic information (number of hours of operation, etc. ).

Characteristics

Manufacturer	Remdevice Srl
The country of manufacture	Italy
Working frequency	433 MHz
Sensing distance	100 m
Response time	50 ms
Max. number of simultaneous on / off commands	12 pcs.
Working temperature	- 20 + 70
Transmitter characteristics
IP degree of protection	65
Low battery indication	in 60 minutes
Power consumption	45 mA
Autonomous working time	35 hours
Signal strength	from 1 to 10 mV
Modulation	FM Manchester code
Console dimensions	97 × 210 × 44 mm
Remote weight	470 g
Source of power	3.6 VDC
Receiver characteristics
Working current of relay contacts	4 A
Supply voltage	10 - 30 VDC, 24 - 48 VAC, 48 - 110 VAC, 230 VAC
Dimensions of the RubyBox External Mounting Receiver	166 x 279 x 91 mm
Guarantee
Guarantee	3 years

 

 

 

Buy a omplekt radio Remdevice Brick wholesale and retail from the manufacturer at a bargain price.
We carry out delivery to the Remdevice Brick radio control set wholesale and retail in all regions of Russia, Azerbaijan, Belarus, Georgia, Kazakhstan, China, Tajikistan, Turkmenistan, Uzbekistan, Ukraine, Armenia, Moldova, Kyrgyzstan, Germany, UAE, Great Britain, Romania, France and etc.