The relay power constraints OM-310
Products from producer
In stock
Reconfirm the price with seller
- Customer pickup,
- Courier
- In detail
Products of other enterprises
Technical characteristics
- BrandНоватек-Электро
- Country of manufactureUkraine
- Voltage380 V
- Гарантийный срок5 лет
- Диапазон номинальных мощностей нагрузки (при работе от встроенных тока)3-30 кВт
- Диапазон рабочих температурот -35º C до +55º C
- Максимальный диаметр провода при использовании внутренних трансформаторов тока12 мм
- Максимальный момент затяжки винтов клемм0.4 Н*м
- Масса, не более500 г
- Номинальное напряжение питания: трехфазное380 В
- Погрешность определения перекоса фаз по напряжению, не более3 В
- Погрешность определения порогов по напряжению, не более3 В
- Потребляемая мощность (под нагрузкой), не более5 ВА
- Сечение проводников подсоединительных клемм0.5-2 кв.мм
- Срок службы10 лет
- Степень защиты клемной колодкиIP20
- Степень защиты прибораIP40
- Температура храненияот -50º C до +60º C
- Частота сети48-62 Гц
Description
Limiter OM-310 Power is designed to:
- consumer protection with substandard electrical parameters of the network;
- full load shedding when power consumption exceeds the basic threshold specified by the user at the time;
- partial load shedding when power consumption exceeds an additional threshold to a user specified time;
- measure and display three-phase network parameters (operating values of the phase and line voltages;
- stresses positive, negative and zero sequences; operating phase currents; consumed by the load of active, reactive and apparent power, power factor phi);
- notification of emergency situations;
- remote connection and disconnection of the load on the RS-232 / RS485 or external switch.
A device designed to work with a load capacity from 2.5 kW to 30 kW using the integrated current transformers up to 350 kW with external current transformers, including in networks with isolated neutral.
Limiter OM-310 output provides the following consumer protections:
- when poor-quality mains voltage (harmful power surges, phase failure, phase sequence and violation of sticking phase distortion phase / line voltage);
- when exceeding a predetermined maximum current in any phase of the load;
by leakage currents on the "ground".
Contact the seller
The relay power constraints OM-310