Reed minimum level sensor

Reed minimum level sensor DMUG - 210, DMUG - 210A

Purpose

• The sensor is designed for switching DC electrical circuits in the signaling system of agricultural machines when the oil level drops to the maximum permissible value.

• The sensor is a brass tube with a built - in reed switch and a float.

• When the oil level drops, the float drops, causing the reed switch contacts to close and send a signal to the alarm system.

Main settings

• Type of climatic modification О according to GOST 3940

• Nominal voltage 24 V

• Sensing distance from tank lid 205 . . .215 mm

• Dielectric strength of insulation, effective value of the test voltage, not less than 220 V

• Switched current, no more than 0.3 A

• Temperature of the controlled environment (oil), from minus 40 ° С to plus 120 ° С