- Country of manufactureUkraine
- Designслужбами автоперевозок
- Type of driveElectric
- Насос К 100-80-160метал
The pump K 100-80-160 - console
|Symbol of the console pump:|
|To 100-80-160а, letters and figures mean the following:|
|To - pump type (console),|
|KM (console and monoblock),|
|100 - diameter of a branch pipe through which goes to mm water absorption,|
|80 - it is diameter of a pressure head branch pipe in mm,|
|160 - it is diameter of the driving wheel in mm,|
|and - the first undercutting of the driving wheel,|
|- a vtorayapodrezka of the driving wheel,|
|m - the increased diameter.|
Purpose of a product: console pump K 100-80-160:
So, the console pump K 100-80-160-is intended for the pumping of clear water or technical solutions which are used on production. Pumping of sea water is not allowed. Requirements to the acid-base environment of the pumped-over liquid with rn from 6 to 9, temperature of liquid has to be in a corridor from 0 to + 85os. Viscosity of liquid has to be similar to water. Chemical activity is not allowed. Contents firm particles up to 0,25 mm in size, small concentration is possible.
Description of the pump K100-80-160:
This pump corresponds to GOST 22247-96. The pump is centrifugal, one-stage. The supply of water (liquid) to the driving wheel of the pump is unilateral. The driving wheel of the console pump K 100-80-160 is on the end of a shaft (console). The shaft of the pump is fixed in case bearings. The electric motor fastens by means of the elastic coupling
Material of details of flowing part of this pump is gray cast iron.
Console and console and monoblock K and KM pumps are issued with equal working properties and at limited working areas the preference is given to execution of the pump KM as, the pump KM has at the 13th smaller length.
Technical characteristics of the pump K 100-80-160:
Table of the pump K100-80-160 of interchangeability
|Standard size till 1972||Standard size of the pump of 1982.||Standard size of the pump of 1990, modern.|