- Country of manufactureRussia
- Maximum temperature– 70 до +260 °С
- Inner diameterот 4 до 32 mm
- Nominal diameter6 мм до 400 mm
- Operating pressureот вакуума до 400 atm
- Type of high pressure hoseBraiding design
Products: PTFE hose corrugated metal sheath type SE / GF and SE / GA, buy in bulk and retail from the manufacturer for export in Russia, Novgorod.
Hoses used for transportation of highly aggressive environments: acids, alkalis, solutions, and any kinds of solvents (other than alkali metal in the molten state, such as sodium, potassium, and fluorine - containing substance in a gaseous state), and at high temperature operating conditions does not lose its performance.
Sleeve PTFE depending on the operating conditions are made smooth, corrugated bellows and the spiral profiled.
Sleeve material: PTFE (F4), ETFE, PFA, PVDF (F2)
- 12X18H10T / AISI 321
- 08H18N9 / AISI 304
- 03H17N14M3 / AISI 316L
- aramid yarns
Restrictions on the length of the sleeves: no
End Connections: flanged threaded, welded, quick release. International and Russian standards. Develop design documentation for non - standard end pieces.
Diameter: 6 mm to 400 mm
Operating pressure: from vacuum to 400 bar.
Breaking pressure: 1600 atm.
Temperature range: from - 70 to 260 degrees.
- TC 032 Declaration
- Certificate of Conformity TC 032
- The certificate of conformity PB + Appendix
- ISO 9001: 2015
- Certificate GOST
Consumer properties: temperature compensation piping extensions of misalignment and vibration.
Application as a bypass line for repair of oil / gas pipelines, and also as a flexible liner. Feed mud into the well under pressure.
Minimum scope of delivery: 1 piece.
Terms of delivery: Depending on the districts, by agreement with the client
Packing: wooden box, pallet, box (depending on volume)
Payment Terms: Prepayment - 100% , 70/30 or 50/50
Country of origin: Russia
Production capacity: up to 15,000 sleeves
Standard. 12 months for typical operating conditions
Advanced. It depends on the technical conditions and the specific operating conditions. The warranty period can be extended up to 18 months at the coordination of all the technical characteristics and conditions of use of the product.
The service life of up to 25 years.
List of all the range of products:
- Metal hoses
- PTFE sleeves
- Drill sleeves
- Flat sleeves
- Composite sleeves