- BrandДельфин См
- Country of manufactureUkraine
- Дельфин СмЗащита от солей, Гидрофобизатор, Усилитель поверхности, Защита от ультрафиолета
Appointment: it is used for protection of the ceramic (brick), brick, concrete, plaster, plastered surfaces, a natural stone, marble, slate, a ceramic tile, forming at the same time a hydrophobic covering. Promotes continuation of term of operation of the basis, essential reduction of formation of fungi and a mold, sensitivity to freezing thawing cycles, reduction of a thermolysis. The processed surface possesses resistance to detergents, considerably facilitates elimination of dirt and spots. Means adds to a surface insignificant gloss and saturation of color, surfaces become more attractive.
For internal and external works! Environmentally friendly product!
Structure: a water emulsion of acrylic copolymers with kremniyorganichesky additives.
Properties: has high coefficient of adhesion (excellent coupling with a surface). Forms the covering resistant to influence of an atmospheric precipitation and difference of temperatures.
Preparation of a surface: from the processed surface to clean dirt, dust and not skintight particles, to clear of fat and oil.
Way of use: to put with a brush, a spray, the roller before full saturation of a surface. To put at a temperature not below + 5 °C as means on a water basis.
Drying time: at a temperature + 20 °C and humidity of air 65 of 30 minutes till 1 o'clock.
Expense: about 50 - 150 g/m ² depending on porosity of a surface.
1) appearance of a film: uniform, without foreign inclusions;
2) the mass fraction of nonvolatile substances, %, is not less: 10;
3) conditional viscosity on the VZ viscometer - 246 with a diameter of nozzle of 4 mm at a temperature
(20 ± 2) °C, with: 7 - 12;
4) drying time to degree 3 at (20 ± 2) °C, mines: no more than 60.
Packaging: 1,00; 5,00; 10,00 kg.
Storage: to store in densely closed container at a temperature from + 5 °C to + 25 °C.