- BrandКузлитмаш, ОАО
- Country of manufactureBelarus
- Pull1000-2500 кН N·m
The press are intended for production of details from sheet and strip hire by method are flexible.
In the universal V-shaped stamp delivered complete with a press the gibk of a large number of various details can make. In the special stamps delivered at additional expense it can be executed, flexible for one transition, stamping and a punched hole of openings is flexible on radius.
Setting up the provision of the ram of press depending on thickness of the bent material is carried out by the adjustment mechanism. The press of the IT 1330 and IT1330F2 models are supplied with the mechanism of compensation of a deflection of a table and the ram that provides a qualitative gibka of rather long sheets of considerable thickness at great efforts of a gib. On pressa two forward emphasis are established that allows to use as a reception table for small parties of preparations, and the back mechanized emphasis intended for an emphasis of the bent material.
Sharing of lobbies and back the mechanized emphasis provides a productive gibka of preparations without change-over. On pressa the safety lock intended for registration of the greatest efforts developed by a press and for shutdown of the main drive at a press overload is established.
The press are equipped with the portable panel (the IR1332, IR1334 and IR1334A models two panels) with two-handled (push-button) management and a pedal which are blocked in such a way that when finding one of systems in working situation the possibility of management of a press from other system is excluded.
Operating mode of press: adjustment, single course, continuous courses.
Lubricant - centralized and individual manual, the syringe through butterdishes.
The press of the IT1330F2 and IT1330VF2 models have the following operational advantages before the replaced pressa of fashion. IT1330 and IT1330V:
- accuracy of installation of a back emphasis is increased approximately five times (to 0,1 mm) due to use of photo-electric (incremental) sensors for control of movement of executive mechanisms, with digital indication of this movement, and also execution of the mechanism of a back emphasis on exact shariko-screw couples (couple of friction "screw nut" were used earlier);
- all main governing bodies of a press, except two-handled management and a pedal, are concentrated on the compact panel of the operator with the tactile and sensitive screen to which necessary office information, including digital indication of adjustments, data on operating modes and ways of management, information on emergency operation is output; all this reduces fatigue of the operator and quantity of possible mistakes, and also reduces time for reinstallation of parameters are flexible, characteristic of production of details with the unbent regiments of different size under different corners;
- reliability of a control system is increased at the expense of a possibility of management of a press as from the panel of the operator, and directly from the controller;
- unauthorized use of a press is excluded as its inclusion is possible only after introduction of a certain code of access.
|Nominal strengthening, kN||1000||1000||1600||2500||2500|
|Length of a table and ram, mm||2500||3150||4050||3150||5050|
|Distance between bed racks in light, mm||2125||2675||3250||2500||4000|
|Course of the ram, mm||80||80||100||100||100|
|Width of a table, mm||200||200||250||320||320|
|Distance between a table and the ram in its lower situation at the top provision of adjustment, mm||300||300||375||375||375|
|The amount of adjustment (distance between a table and the ram), mm||125||125||125||150||150|
|Distance from a ram axis to a bed (departure), mm||250||250||400||400||400|
|Number of the continuous courses, min.||40; 10||40; 10||20||20||20|
|Potreblyamy control system power, kW||13,74||13,74||18,9||24,34||24,34|
|Working pressure of compressed air, MPa||0,5||0,5||0,5||0,5||0,5|
|Consumption of air, N of m3||0,0027||0,0027||0,003||0,008||0,008|
|Overall dimensions, mm, no more|
|from left to right||3000||3650||4330||3750||5260|
|in front back||1820||1820||2230||3390||3390|
|height over floor level||2945||2945||3650||4000||4000|
|Weight, kg, no more||9570||10300||17700||29500||38000|
Key technological parameters
|Flights of streams,
|Leaf thickness at
to max. length are flexible,
|Max. thickness of bent
leaf on length,
|1000||2500||7, 10, 15, 24, 38, 58||5 (And =58)||10х1000|
|1000||3150||7, 10, 15, 24, 38, 58||5 (And =58)||10х1000|
|IR1332||1600||4050||10, 15, 26, 38, 58, 85||6 (And =85)||12х1630|
|IR1334||2500||3150||10, 15, 26, 38, 58, 85||10 (And =85)||12х2550|
|IR1334A||2500||5050||10, 15, 26, 38, 58, 85||8 (And =85)||12х2550|
|The details made on universal
|Determination of effort are flexible (in tons)
at L=1000 mm and temporary resistance of 40 MPas
bending of an edge
|Radius of a gib||Thickness of a leaf (S), mm|