Before delivery from manufacturer the press passes 20 hour test run regarding identification of possible shortcomings with use as the bricketed material of sawdust.

Design, production and assembly are completely carried out at plant in of Zaisertshofen, Germany.

• Three axial-plunger pumps with an adjustable productivity
  • pressure in system - max. 300 bars
  • main highly effective (EFF1) the drive electric motor - 90 kW, 400 V / 50 Hz, 3 phase, 1.500 rpm.
  • class of safety of IP 54
• Tank for hydraulic oil (2000 liters) with 2 filters of the big size integrated into it 10µм for filtering of the returned oil
• Forced integral cooling system of oil with the drive electric motor of 2,2 kW and 5µм the filter of thin cleaning
• HLP 46 hydraulic oil
• The protection device at an overheat and low level of hydraulic oil
• Redistribution of oil happens in system by means of electromagnetic distribution valves (Parker)
• Rods of all cylinders have the chromeplated covering
• Pushers of briquettes have the hydraulic drive

• Cabinet of electroautomatic equipment DIN EN60204-VDE 0113, a class of safety of IP 54 agrees
• Supply voltage of 400 V, 50 Hz
• Operating voltage of a power supply of electroautomatic equipment of 24 V (direct current)
• The programmable controller (PLC), the SIEMENS S7-200 model with a director's console and displays of information Siemens TP 177B providing:
  • display acting and a possibility of change of the established values of parameters of briquetting
  • management of work of a press
  • self-diagnostics and warnings of failures in work of a press
• The automatic start / feet of a press provided with the infrared sensors located in the loading hopper of material
• Control of provisions of cylinders is provided with contactless inductive terminal switches
• All electric motors have thermal protection against an overload

Press productivity:

• Depending on installations - to 440 briquettes an hour or about 1150-1350 kg/h (depending on fraction and density of material)

Briquette size:

• 260 x 100 mm in section
• Length of a briquette of 80 - 140 mm depending on installations and a type/size of the bricketed material
• Max. specific pressure pribl. 1.700 kg/cm ²

Leading dimensions/Weight:

• Pribl. (d x sh x c) 3000 x 3300 x 2300 mm
• The specified sizes do not consider necessary working space for service of the press making 1000 ÷ 1500 mm
• Weight (without options) pribl. 11.000 the kg separated on:
  • the pressing part - pribl. 7.000 kg
  • hydraulic part - pribl. 4.000 kg