Power-saw bench disk angular pileniye of PDU1-500

The power-saw bench of PDU1-500 is intended for sawing up of logs on a bar and a board. The disk pileniye provides ideal geometry of a board and high efficiency. The main advantage of disk power-saw benches before tape is a quality of the received timber. The surface of a board of a disk cut - is ideal, does not demand polishing. Also circular saws at permanent job demand replacement (for sharpening) all once a week whereas tape it is necessary to change, at the same intensity of work, each 2 hours! Pileniye is carried out in both parties, without the single courses. The power-saw bench provides the most flexible choice of the scheme of cutting of a log, the maximum exit of a board of a radial cut, a pileniye of hard-wooded broadleaved and resinous breeds of wood.

Pileniye cycle: the course forward, turn of a saw, the course back on a log of 6 m is carried out in 20-25 seconds.

At the beginning of work the saw is in horizontal position. During advance the power-saw bench carries out a horizontal cut on log length. On the end of a log the saw turns in vertical position. During the return movement the made an incision part separates vertical cutting. At completion of reverse motion, the saw comes back to horizontal position. Thus there is a fast cut of a log on cut timber of a given size