Pneumoshock obrushitel (pnevmoobrushitel) of codes of bulk solids

We bring to your attention vibroaeration plates (vibroaerators) for aeration of the loose product and elimination of codes in bunkers, silos and other tanks. Simplicity and reliability of the design allows to use these plates on the most various range of products: flour, cocoa powder, cement, sawdust, gluten and many others. Benefits and features: • air from vibroaeration plates not only aerates material, but also creates the resonant vibration wave in the course of material unloading; • it can be used in the course of transportation to seize the material feed to the screw/feeder, and in intervals between uses to saturate with air material; • the unique form of vibroaeration plates provides excellent quality of sealing in the wide range of surfaces of bunkers and silos; • does not depend on humidity of the product; • Working temperature - from - 40 degrees to + 150 degrees Celsius. Vibroaerators are used in the wide range of loose products. But they are most popular for the following products: aluminum hydroxide, bentonite, boric acid, plaster, gluten, dolomite, grain dust, ashes, lime, cocoa, calcium carbonate, compound feed, flour, PVH powder, soot, salt, soda, cement. Installation. Vibroaeratra are established on walls of bunkers in places of the bedding of the product, as a rule, on the lower cones. Use of vibroaerators and in other processing equipment where the bedding of the product takes place is possible. For installation of the vibroaerator it is necessary to make the opening in the wall of the equipment and to install the vibroaerator, inserting it from internal part of the bunker so that the membrane was densely pressed to its wall and to tighten the nut from the outer side of the bunker. It is very convenient since in case of wrong determination of the location the small opening on the wall of the bunker can be muffled easily.
Principle of work. In the bunker the flow of compressed air leaves between the membrane and the wall of the bunker. At the same time there are two processes of the codes promoting destruction. Vopervykh, from under the membrane the flow of compressed air goes along the bunker wall, thereby discarding the product from the bunker wall. Secondly, in the course of the air outlet from under the elastic membrane there is the vibration which is transferred directly from the membrane, to both the product, and the wall of the bunker and further the product. The combination of these processes provides very effective svodorazrusheniye, at the same time, without causing damage to the bunker. The external management system manages operation of vibroaerators.