- Country of manufactureRussia
Engineering - technical staff of "ROSTZIP" gives the customer a full range of services from design to commissioning , relating to water treatment systems of water supply networks:
- Food Industry
- pharmaceutical industry
- power system
- municipal building
- Pools and fountains and so forth.
This allows you to get away from the middlemen, reduce the overall cost of the project to improve the quality and reliability ensure a long trouble - free operation systems.
Our experts make the selection of the most appropriate customer process flowsheet.
The main criteria for this are the physical - chemical and microbiological water analyzes and its quality requirements.
When using a reverse osmosis method desalting raw water stream is separated into two components: a permeate, which is a desalinated water and the concentrate - water with an increased, as compared with the original, salt content. The proportion of permeate may be different depending on the performance of reverse osmosis industrial system, composition and initial water temperature, the type of membrane elements used and other parameters and is usually about 60 - 80% of the original water.
Compared with traditional methods of chemical desalination system that uses industrial osmosis, have some increase in capital investment, but by orders of magnitude lower operating costs. The membrane separation is in most cases optimal method for water desalination, as this eliminates the need for industrial wastewater facilities and special storage facilities for corrosive reactants, as well as sharply reduced negative impact on the environment.
Following the results of these tasks carried out customer receives the optimum water treatment project designed to carry out specific tasks.