Fiat New Holland 480 55 HP Power

ENGINE POWER:
At flywheel 55 HP

OPERATING WEIGHT:
1,710 KG

SPEEDS (KPH)With Tyres
Engine Speed (rpm)
Pto Speed (rpm)
Forward
First
Second
Third
Fourth
Fifth
Sixth
Seventh
Eight
Reverse
First
Second
2,160
540

1.87
2.82
4.13
5.33
6.75
10.15
14.86
19.20


2.69
9.70 12.4/11-28
2,500
625

2.17
3.26
4.78
6.17
7.81
11.75
17.20
22.22

3.11
11.22


ENGINE:New Holland 8035.06
4-Stroke, direct injection diesel engine
Number of cylinder:3
Bore and stroke:100 x 115 mm
Piston Displacement:2,710 cc
Compression ratio:17:1
Max. Torque at 1,500 rpm: 22.7 kgm
Dry-type cylinder liners
Water cooled, Four-row brass tube & copper fin radiator
Forced-feed lubrication system
Distributor-type fuel injection pump with mechanical speed governor
Vertical exhaust muffler



FILTERS
Air: Oil-bath with pre-cleaner and semiautomatic dust unloader.
Fuel: 2 replaceable cartridges.
Oil: Easy-to-change, continuous flow cartridge.

CLUTCH
Dual plate, dry-type, with separate controls (pedal for transmission and hand lever for PTO), diameter of plates: 11 inch
Plate facing of asbestos compound
TRANSMISSION:
Gear box with constant-mesh gears: 8 forward and 2 reverse speeds;
Synchromesh on 3rd, 4th, 7th and 8th
speeds Differential with pedal actuated lock and automatic disconnection Single-reduction spur gear final drives Gear Box mounted starter safety switch

FRONT AXLE
Telescopic type, inverted U, variable tread

DRIVER'S SEAT
Fully upholstered with parallelogram suspension, adjustable to driver's weight.
THREADS
Front (8 position):
1.320 - 1,420 - 1,520 - 1,620- 1,720 - 1,820 - 1,920 - 2,020 mm

Rear (8 position):

1,200 - 1,300 - 1,400 - 1,500- 1,600 - 1,700 - 1,800 - 1,900 mm


STEERING
Manual, recirculating ball type, centre relay lever, joints lubricated for life

POWER TAKE-OFF
6 spline shaft - 35 mm dia / 1-3/8"
Fully independent: 540 rpm at 2,160 engine rpm
High-speed DTO (*) 35 mm dia / 1-3/8"
same speed as engine rpm
(*) For application of high speed implements.

HYDRAULICS LIFT
With draft and position control, Draft control through top link, Gear type hydraulic pump driven from engine crankshaft, Pump capacity: 22.7 l/min Relief value opening pressure: 150-170 kg/sq. Cm 3-point linkage Cat I-II Manual response control Lower links with sway restrictors Control Lever with safety stop. Max. Lifting capacity: 1,450 kg

BRAKES
Service dry band-type with mechanical control
Parking: with hand lever

CAPACITYFuel tank:
Engine oil:
Hydraulic Transmission:
Rear Axle:
Air Cleaner:54 ltr
08 ltr
18 ltr
2+2 ltr at sides
01 ltr



TYRESFront:
Rear:6.00-16
12.4/11-28


BODY
Hood has side-hinged cover for engine inspection. Front grill is easily removable for quick access to air cleaner and battery

ENGINE
Cold starting aid (Thermostat)
Radiator screen

LIGHTING SYSTEM
With 3-position headlights, plough lamp, blue high beam warning light on dashboard, low oil pressure warning light