PISTON FIAC F 500 AB Compressor of 678 T

Article: [PM-3104.03] of Prizvoditelnost of l/min: 1300 Engine capacity of kW: 4.0+4.0 Number of cylinders: 2/2 Volume of a receiver of l: 500 Pressure of bars: 10 Overdressing In: 380 Weight of kg: 310 Piston compressor tandem FIAC F500 AB678 T with the belt drive; Quality Two-level maslozapolnenny piston FIAC block; Compression of air in two stages - high efficiency, low noise level; For professional uses, large productions; Productivity - 1300 l/min (entrance), 1050 l/min (at the exit); Two engines on 4.0 kW on one receiver of 500 liters maintaining intensive loadings with protection against an overload; The Big oil case for effective lubricant of pistons; The Filling volume of oil - 1.6+1.6 liters (oil compressor); Monoblock kostruktion of piston blocks with effective cooling of cylinders; Thanks to active and passive methods of cooling the long time without overheat can work; Manual control and automatic (with the control panel); It is equipped with manometers (pressure in a receiver and reguliroyemy pressure in a reducer at the exit). Operating mode of the compressor - repeated and short-term, lasting inclusion up to 60%, from 6 to 10 min. lasting one cycle. Continuous operation of the compressor is allowed no more than 15 min., but is not more often than once within 2 hours. Complete set: installation is compressor, the operation manual, a set of wheels and shock-absorbers, a container transport, the passport of a receiver, the passport of the safety valve. The air filter on an entrance. The compressor is filled with oil and is ready to work! ATTENTION!!! During the cold period of year, at a temperature below +5ºС, it is impossible to turn on the equipment right after delivery, in order to avoid formation of condensate - it can lead to breakage. Before the first inclusion it is necessary to wait 8 hours at the room temperature.