PISTON FIAC F 270 AB 858/16 Compressor

Article: [PM-3106.06] of Prizvoditelnost of l/min: 850 Engine capacity of kW: 7.5 Number of cylinders: 2/2 Volume of a receiver of l: 270 Pressure of bars: 16 Overdressing In: 380 Weight of kg: 190 Compressor piston F270 AV858/16 of FIAC of elevated pressure (16 bars) two-level oil with the belt drive Productivity - 850 l/min (entrance), 680 l/min (at the exit); Pressure maximum - 16 bars; The Filling volume of oil - 1.6 l (oil compressor AGIP Dicrea P100); It is intended for professional use; Compression of air takes place in two stages - high efficiency, low noise level; Active and passive methods of cooling allow to work a long time without overheat; The Monoblock kostruktion of the piston block with effective cooling of cylinders; Automatic turning on of the compressor at pressure drop; The Big oil case for effective lubricant of pistons; The Three-phase electric motor maintaining intensive loadings with protection against an overload; Safety and service valves; It is equipped with two manometers (pressure in a receiver and reguliroyemy pressure in a reducer at the exit). Operating mode of the compressor - repeated and short-term, lasting inclusion up to 60%, from 6 to 10 min. lasting one cycle. Continuous operation of the compressor is allowed no more than 15 min., but is not more often than once within 2 hours. Complete set: installation is compressor, the operation manual, a set of shock-absorbers, a container transport, the passport of a receiver, the passport of the safety valve. The air filter on an entrance. The compressor is filled with oil and is ready to work! ATTENTION!!! During the cold period of year, at a temperature below +5ºС, it is impossible to turn on the equipment right after delivery, in order to avoid formation of condensate - it can lead to breakage. Before the first inclusion it is necessary to wait 8 hours at the room temperature.