Panels wall wooden
- Customer pickup,
- Courier
- In detail
- MaterialWood
1.1. Flat rustovanny shponirovany paneliizgotavlivatsya from the integral chipboard 10 mm thick revetted with valuable breeds of an interline interval of wood. The end faces of panels seen when joining, zashponirovana that favourably distinguishes them from panels of other producers. Finishing finishing of front parts is made by polyurethane varnishes of the leading global manufacturers of paint and varnish production - "ICA" (Italy) and "BARPIMO" (Spain).
1.2. Rustovochny (connecting) levels are made of 3 mm of MDF by a sotdelka polyurethane varnishes of the leading global manufacturers of paint and varnish production - "ICA" (Italy) and "BARPIMO" (Spain), or decorative plastic with a surface from natural aluminum.
1.3. The corner for turn, or the termination of the panel, is made of 10 mm of MDF revetted with an interline interval of valuable and exotic breeds of wood with finishing by polyurethane varnishes of the leading global manufacturers of paint and varnish production - "ICA" (Italy) and "BARPIMO" (Spain).
1.4. Assembly the lath represents a planed bar with a section of 20 x 40 x 2200 mm from solid pine.
2. Features of wall panels.
2.1. Features of panels.
· Exists 5 standard (main) of a type of an interline interval: wenges, a chestnut, a nut Italian, mahogany (snuffled), the bleached oak.
· Size of the panel of standard 1200 x 600 mm.
· The structure of an interline interval is gathered along the bigger size of the panel.
· The panel back, for prevention of deformation after operation of a shponirovka, becomes covered by a technical (not front) interline interval that gives stability of a design.
· Width and depth of a groove, for fastening of a connecting level, is calculated so that, on the one hand, to provide reliable and dense fastening at installation, and on the other hand, is sufficient to hold a design and not to break.