Currency EUR
Paint for a marking of roads, AK-585, AK-539 – Soyuz NPF, TOO | all.biz
Buy Paint for a marking of roads, AK-585, AK-539
Paint for a marking of roads, AK-585, AK-539

Paint for a marking of roads, AK-585, AK-539

In stock
Reconfirm the price with seller
Shipping:
Seller
Kazakhstan, Aktau
(View map)
+7(7 
Display phones
Description
Scope.

For drawing a road marking on asphalt, petrobituminous, concrete surfaces of roads and similar to them transport ways, parking of vehicles, airfields and other surfaces with traffic. It can be applied in hangars, warehouses and other rooms of industrial function.

Features:

paint conforms to requirements of GOST P 51256-99 imposed to paints and varnishes for a marking of roads.
in need of paint reflecting glass balls can be added.
the covering is wearproof, maslobenzostoyky, resistant to influence of water and saturated NaCl solution.
the covering is steady against influence of temperatures from minus 30 °C to +40 °C

Main characteristics:

Organorazbavlyaemy, unicomponent paint for drawing a road marking on the basis of acrylic copolymers.
Adhesion by a method of trellised cuts: point, no more than 1.
Conditional viscosity: at °C t+20 on VZ-246 with — 80-160
Dispersion degree - 60-70 microns
Mass fraction of nonvolatile substances not less than 66 - 70.
Drying time to "otlip" (to degree 3) at t (20±5) °C — 25 min.
Thinner: a xylol, toluene, depending on the drawing temperature (no more than 10 from weight paint).
The recommended quantity of layers - 1, if necessary more.
Approximate expense: 180-300 g/m2, depending on porosity of "substrate"
Resistance of a film to static influence of water, and also saturated NaCI solution, at a temperature (20±2) °C — not less than 48 hours
Appearance of a covering Uniform opaque film
Drawing method: brush, roller, by methods of airless and pneumatic dispersion, filling.
Primary colors: white, yellow; in coordination with the customer — other colors.

Recommendations about application.
Recommendations about drawing
Cleaning
To clear a surface of dirt, dust, oils. The painted surface has to be dry
System of drawing
does not demand preliminary priming
Material preparation
Carefully to mix paint, if necessary - to dilute.
Drawing on old coverings
It is allowed on strongly keeping materials for a road marking
Drawing conditions
Air temperature — From minus 5 °C to +30 °C
Humidity of air — is Not higher than 80%
Surface temperature — On 3 ° is higher than "dew point"
Not to carry out work at direct impact on a surface of strong wind and an atmospheric precipitation.
Washing of the tool
Toluene

Warranty period of storage. 6 months from the date of production

Transportation. In densely closed container at a temperature from minus 20 °C to +35 °C

Storage conditions.
In the aired room far from heating devices and sources of naked flame or on the open areas under a canopy, without allowing hit on production of direct sunshine.
Contact the seller
Paint for a marking of roads, AK-585, AK-539
Paint for a marking of roads, AK-585, AK-539
Shipping method
Compare0
ClearSelected items: 0