- BrandБранше
- Country of manufactureFrance
- TypeMineral
- Type of paintPigment
- PurposeFor offset printing
- Офсетные краскидля полиграфии
The company Futuris, SOOO offers you Paints and varnishes offset productions of Branshe (France).
DESIGN
Area primeneniya: listovy offset
Characteristics:
- a universal night series of offset paints on the basis of vegetable oils
- low stickiness: it is suitable for the bilateral press on 8 - 10 - 12 - colourful printing machines
- it can be applied on the most various materials
- good stability at the press at high speeds
- paint conforms to requirements of the ISO standards 2846 - 1 and ISO 12647 - 2: very exact reproduction of triad flowers
Freshness in a colourful box | + + + |
Initial fixing | + + |
Intensity of color | + + |
Luster | + + + |
Resistance to attrition | + + |
Final drying |
+ |
Recommendations about the sealed material:
Paper offset | + + |
Opaque chalk overlay paper | + + + |
Glossy chalk overlay paper | + + + |
Uncoated paper of small density | + + |
Cardboard | + + + |
Unabsorbed materials | + |
Synthetic materials | ^ |
Note: * * * - it is recommended, * * - it is possible, * - it is possible, but with care, ^ - it is not recommended (unabsorbed materials: the waxed and metallized paper, chromoluxury; synthetic materials: polyethylene, polypropylene, PETF, PVC)
Recommendations about use:
- the subsequent varnishing "crude on crude" and "crude on dry" the oil or dispersive varnishes intended for use on these materials is possible (it is recommended to hold preliminary testing)
- lamination or varnishing nitrocellulose or UF - varnishes perhaps after sufficient drying (preliminary testing is recommended) - the recommended hold time of circulation before lamination or UF - varnishing: 25 - 48 hours - a series is compatible both with spirit, and to alcohol - free moistening
- allows IK - drying use; the most admissible temperature in foot: 35 º With at the press of the person and 30 º With at the turn press
- it is not recommended to use IK - drying in case of the subsequent UF - varnishing
- at the press on a cardboard the subsequent varnishing is recommended
- time of final fixing depends on amount of paint, the area of a zapechatka, type of paper, ambient temperature, etc. It can be 4 - 5 hours at the press a raster of light tones on paper with high extent of absorption or 20 - 24 hours at the press of saturated dies on the supercalendered paper.
- for acceleration of process of drying use of sikkativ is recommended. Use of sikkativ reduces freshness of paint in a kipseyka.
Design | Light resistance | Alcohol resistance | Alkali resistance |
Process Yellow | 5 | + | + |
Process Magenta | 5 | + | - |
Process Cyan | 8 | + | + |
Process Black | 8 | - | + |
Light Fast Process Yellow | 6 | + | + |
Light Fast Process Magenta | 7 | + | + |
KRYPTO
Scope: Sheet offset, a universal series with the increased resistance to attrition
Characteristics:
- a universal series of offset paints on the basis of mineral oils
- excellent resistance to attrition: it is suitable for printing of labels
- low stickiness: it can be applied on the most various materials
- bystry fixing: bystry postprinting processing (also the folding is sharp)
- paint conforms to requirements of the ISO standards 2846 - 1 and ISO 12647 - 2: very exact reproduction of triad flowers
Freshness in a colourful box | + |
Initial fixing | + + |
Intensity of color | + + + |
Luster | + + |
Resistance to attrition | + + |
Final drying |
+ + |
Recommendations about the sealed material:
Paper offset | + + |
Opaque chalk overlay paper | + + + |
Glossy chalk overlay paper | + + + |
Cardboard | + + + |
Unabsorbed materials | + + |
Synthetic materials | + |
Note: * * * - it is recommended, * * - it is possible, * - it is possible, but with care, ^ - it is not recommended (unabsorbed materials: wax paper, chromoluxury; synthetic materials: polyethylene, polypropylene, PETF, PVC)
Recommendations about use:
- the subsequent varnishing "crude on crude" and "crude on dry" the oil or dispersive varnishes intended for use on these materials is possible (it is recommended to hold preliminary testing)
- lamination or varnishing nitrocellulose or UF - varnishes perhaps after sufficient drying (preliminary testing is recommended)
- the recommended hold time of circulation before lamination or UF - varnishing: 25 - 48 hours - a series is compatible both with spirit, and with alcohol - free moistening - for acceleration of process of drying use of sikkativ is recommended.
- at the press on synthetic materials it is necessary to be convinced previously that the surface is properly processed
Design | Light resistance | Alcohol resistance | Alkali resistance |
Process Yellow | 5 | + | + |
Process Magenta | 5 | + | - |
Process Cyan | 8 | + | + |
Process Black | 8 | - | + |
Light Fast Process Yellow | 6 | + | + |
Light Fast Process Magenta | 7 | + | + |