- Country of manufactureBelarus
Noriya (the vertical conveyor) as a part of a site of pressing (granulation) is intended for transportation of hot granules to a cooler and for transportation of the cooled-down granules from sorting in the bunker of finished goods.
Noriya represents the car of continuous transportation with flexible traction body in the form of a belt (tape).
The loose product comes to a noriya boot through a loading sock. The drive rotates a driving drum which, in turn, sets in motion a tape with the ladles fixed on it. Passing around a boot drum, ladles are loaded by material and rise to a noriya head where under the influence of centrifugal force unload in an unloading branch pipe.
The power shaft with the drum got on it, is installed on rolling bearings and is mounted with cases of bearings on the head case. The boot of a noriya consists of the welded case, the conducted shaft, with the drum got on it, a reception sock and two gates. The case of a boot has a flange for connection of section. The reception sock is executed in the form of a steel tray.
The conducted shaft, with the drum got on it, is established on rolling bearings which cases fasten to mobile plates. The screw tension device serves for providing a necessary tension of a tape. Gates are intended for cleaning of a boot of a noriya. The noriya drive - the motor reducer. Sections are the self-bearing design and serve as a tape protection with ladles. For installation of a tape, fastening and replacement of ladles the removable cover is used.
Standard complete set:
1. A noriya boot with tension devices.
2. Case sections (the quantity depends on height of raising of a product, the usual length of section - 2 m).
3. A noriya head with the drive.
4. A tape (usually from the reinforced rubber).
Options: vzryvorazryadny section, sensors of a descent and slipping of a tape, an observation port, a tape from heat-resistant rubber.
Advantages of noriya of production:
Tselnoshtampovanny ladles - smaller susceptibility of corrosion, bigger service life.
Compactness, minimum height of a loading sock.
The rigid design and high precision of production of a noriya - is not required a special frame for its fastening (installation).
The tight design excluding dust emission.
The special design of drums interfering a tape descent.
Ease and convenience of service.