Currency EUR
Nasos-teplogenerator NTG-55 – Teplo XXI veka , OOO | all.biz
Buy Nasos-teplogenerator NTG-55
Nasos-teplogenerator NTG-55
nasos_teplogenerator_ntg_55
nasos_teplogenerator_ntg_55

Nasos-teplogenerator NTG-55

Products from producer
Custom order, 50 days
Price:
4517.97 EUR
Wholesale:
  • 4118.15 EUR/pcs  - from 5 pcs
Shipping:
Seller
Russia, Moscow
(View map)
+7(4 
Display phones
Technical characteristics
  • Brandратрон
  • Country of manufactureRussia
  • The medium to be pumpedWater with impurities
  • Typ av InstallationSemi-submersible
  • Type of pumpVortex
  • SealedYes
  • Type of driveMechanical
  • КПЭ2,0
Description

In comparison with traditional sources of heat, heatgenerators allow to cut expenses on heat supply several times.

Nasosy-teplogeneratory it is possible to apply not only in stationary thermal points. At construction pre-fabricated constructions of modular type are practically always used. Heating of such constructions is possible and it is necessary to make by means of block and modular thermal point in container option (BMTP) which part one is - two pumps heatgenerators, circulation pulsers, broad tanks, filters, sensors, automatic equipment, etc.

The pump - the NTG heatgenerator is the counterfeit products which are turned out according to our old drawings stolen at the company and without appropriate license. Buyers of the pump - the heatgenerator violate the Criminal code of the Russian Federation. Read about responsibility for such actions:

"An extract from the Resolution of the Plenum of the Supreme Court No. 14 of April 26, 2007. "About practice of consideration by vessels of criminal cases about violation of author's, allied, inventive and patent rights. Art. 147 of the Criminal Code of the Russian Federation, Art. 104.1 of the Criminal Code of the Russian Federation, Art. 180.3 of the Criminal Code of the Russian Federation."

The thief always tries to sell a stolen property cheaper. And it is much simpler to steal only three sets of old drawings on model of our installations, than to make them. You saw thieves much – workaholics?? "Stole – drank – in prison! Stole – drank – in prison! Romanticism!!!" - the actor Evgeny Leonov in the movie "Gentlemen of Good Luck" truly told. And the end at them is known too: "The thief has to be imprisoned!" - it was told by Vladimir Vysotsky in the famous movie of Stanislav Govorukhin and put all gang watering can in the paddywagon.
In competent authorities there are four statements upon sale of counterfeit production of LLC Teplovye effektivnye sistemy. All cases will be investigated and brought to court. white Olga Filippovna and her accomplices will be condemned and will stay the term allotted by court!! It is unlikely they will be able to fulfill the contractual obligations from the pre-trial detention center.

Video about production of the company:

http://expert.ru/2012/11/16/moskovskie-innovatsii/

The true equipment holding patents since 2007 - the thermal hydrodynamic pump - modern, highly effective, autonomous, energy saving systems of heating, heat supply and GVS. They are intended for:

- autonomous heating inhabited, office, sports, production and warehouse, greenhouses, etc.;

- heating of water for: household and technological purposes, baths, laundries, pools, etc.

What is energy saving system of heat supply? The answer lies in the name. It is system which makes and transfers heat with the highest efficiency. And the easiest way to make system of heating energy saving – to bring closer production of heat, to the consumer of this heat and not to lose it in worn-out heating mains. Prime cost is warm almost everywhere considerably low prices of heat bought "from outside". Is much more perspective to spend money for own development, but not for development of other enterprise which is, as a rule, the monopolist.

Thermal hydrodynamic pumps have also many other advantages: develop environmentally friendly heat, can be used in seismically dangerous zones, vzryvo-are fireproof, irreplaceable in the mountain area at terrace building, can work in a complex with wind farms and small hydroelectric power stations. In the presence of thermal accumulators allow to use the free electric power on the minimum tariffs at night.

TS1 type thermal hydrodynamic pumps are modern , high-efficiency, self-contained, energy-saving, ecologically friendly heating, heat supply and hot water supply systems. They are intended for:

- autonomous heating residential, office, sport, industrial and storage buildings, greenhouse, etc;

- heating of water for: household and technological purposes, bathhouses, laundries, pools, etc.

Thermal hydrodynamic pumps have many advantages: generate pollution-free heat, can be used in seismically danger zones, they are explosion-and fire-proof, irreplaceable in mountain area with terrace site development, can work as a complex with wind power stations and small hydrostations. In the nighttime the pumps with heat accumulators allow to use free electric power at the minimum prices.

Commercial products (TU 3631-001-78515751-2007, Certificate of conformity # ROSS RU.AYa46.V12043) - TS1 type thermal hydrodynamic pumps - represent the standard induction motor of 3000rpm, supply voltage 380V, skid-mounted with a heat-generator, transforming mechanical energy into thermal energy. They are completely ready for connection to a new or existing heating system, and the design and dimensions of the thermal hydrodynamic pump simplify its disposing and mounting in a heat supply unit. For reliability it is recommended to apply at least two thermal hydrodynamic pumps in a heat supply unit. Preliminary selection of the thermal installations power applied for heating is executed by the specification - 1kW supplied thermal energy per 10sq.m of heated area (for Moscow region rated air temperature – 26 °C of within a week). Selection of the thermal hydrodynamic pump power is executed by the specification - 1kW of the electric motor installed capacity per 30sq.m of heated area. Thermal hydrodynamic pumps must heat conditional typical (matching the requirements of Construction regulations) residential, household, cultural-entertaining premises, premises of industrial-economic purposes, etc., of the volume: TS1-055 – 5180m3, TS1-075 – 7060m3, TS1-090 – 8450m3, TS1-110 – 10200m3  (the thermal hydrodynamic pump marking specifies the installed capacity of the used electric motor).

Necessary temperature mode can be maintained in heated premises. For example, 20 - 22 °C for living spaces, 15 - 18 °C – industrial spaces, 8 - 12 °C – warehouse. Temperature mode regulating is made by setting the heat carrier temperature range on the control panel. As heat carrier heats up to the set maximum temperature the thermal hydrodynamic pump turns off, as heat carrier cools to the minimum set temperature – turns on. It is generated exactly as much thermal energy as much heat loss of a heated object. During winter periods the operating time is more and less for autumn-spring periods. For the average heating season (for Moscow region it makes 210 days) equipment operates of 25-30% of time (see Table 1). Therefore we apply factor Koper. = 0.3  to preliminary calculation of financial expenditure for heating


     Comparison of costs for heating and heat supply, which we conducted on the basis of six-years operating experience, show that energy carrier costs with thermal hydrodynamic pumps are lower than with heating coil and electrode boilers in 3-5 times, diesel fuel – in 8-10 times, gas-fired boilers – on of 15%, central heating – in 3-5 times. Besides, multitariff electric counters are installed in many places. For example, "Dubna" holiday camp (Sergiev Posad, Moscow region), where thermal hydrodynamic pumps work, has five-tariff counters. Water for heating and HWS heats up in an accumulative tank at the minimum tariff that sharply reduces the costs.

 

Maintenance costs for heating, heat supply and HWS with thermal hydrodynamic pumps much lower than with gas-fired boilers. Thermal hydrodynamic pumps are fire-and explosion-proof. They are simple in maintenance, an electrician without special training can serve them. Gas boiler-houses must be served by the specially qualified personnel, numerous controlling bodies regularly check an equipment condition, etc.

 

Maintenance of diesel and gas boiler-houses attached to a building is prohibited in some regions of Russia. We recommend to re-equip such boiler-houses with thermal hydrodynamic pumps as it minimizes capital outlays and also lowers maintenance costs.

 

Since a stage of licensing documentation reception capital outlays for construction of a gas boiler-house are more in many times than for thermal hydrodynamic pumps. Design of a gas boiler-house is more expensive, auxiliary equipment nomenclature is more difficult and more in terms of quantity, so-called "binding" including chimney. Expenses for gas pipeline from a main to a boiler-house, which cost can be more than the boiler cost, are separate charges. At the same time we regularly see users who could not lay a gas tube or heating main at all due to existing buildings.

 

The above-stated definitely leads to conclusion that construction of a heat supply station with thermal hydrodynamic pumps considerably cheaper and faster than construction of a gas boiler-house, and in some cases construction of a gas boiler-house is simply impossible.

 

Some not much competent persons express an opinion on higher reliability of heat sypply with gas and diesel boiler-houses in case of power cutoff. However, they forget that even solid-fuel boiler-houses have automatics and pump equipment, which require electricity. For socially important objects diesel-generators ensuring equipment functioning at off-design situations are provided. The Diesel-generator must have high capacity to maintenance operation of thermal hydrodynamic pumps. Off-design situations do not happen often, therefore economy with a normal heat supply will repay with interest a little higher cost of the diesel-generator.

 

Thermal hydrodynamic pumps can be applied not only in stationary heat supply stations. Practically always fast-erected constructions of modular type are used in construction. Heating of such constructions is possible and necessary to make with building block heat supply station (BBHSS), which construction includes one or two thermal hydrodynamic pumps, circulating pumps, expansion tanks, filters, sensors, automatics, etc. We developed design of a typical BBHSS, and some modules in modification - with one and three TS1-055 installations – were manufactured. Full-scale tests and design adjustment of a pilot BBHSS for heating of derricks have been successfully conducted for 2007/2008 heating season.

 

The "Teplo XXI veka" company is awarded with a "Saint George" statuette, one platinum, five gold and one silver medals for development and manufacture of thermal hydrodynamic pumps. Sales manager of our organization - V.A.Kim has won the "Vision of the future" nomination in the "Ideas factory" – TV competition on new power-efficient, energy-saving technologies, where tens designs have been presented.

 

More information about the company can be seen on the web site 



I hope for cooperation!

 

Sincerely, deputy director Konstantin Urpin, CEO

Contact the seller
Nasos-teplogenerator NTG-55
Nasos-teplogenerator NTG-55
Shipping method
Compare0
ClearSelected items: 0