- Country of manufactureUkraine
- Диапазон автоматического регулирования температуры, °С40...1000
- Номинальная мощность, кВт65 ±5
- Параметры электропитания3×380 В, 50 Гц
- Размеры рабочего пространства, ширина × длина × высота, мм900×1200×600
The electric furnace SNO-9.12.6/10 is designed for the heat treatment of different products in stationary conditions. The furnace is equipped with an automatic temperature control system: sets the temperature, heating speed to the predetermined temperature and holding time at this temperature. Temperature range from 40°С to 1000°С. Heaters are placed on the tubes in the slots of the side and end walls of the furnace, on the doors and in the hearth. Hearth heaters are covered with ceramic tiles. Hearth of the furnace lined with solid refractory materials, and chamber walls - by microporous and fibrous materials. Electric furnace has supply & exhaust air ventilation holes to remove any gas emissions. Also there are special channels in the side walls of the furnace for heat removal and forced air blowing on them. It provides the ability to control the temperature all over of oven chamber. The number of thermocouples - two, t a distance of 300 mm from the oven door and 300 mm from oven rear wall. Also available are holes for control thermocouples on the other hand on top of working thermocouples. The mechanism of opening and closing the oven door - electric drive.
Production of equipment is carried out by prepayment of 50% on the bank account of the company.
Shipment of the product after 100% payment
- Transport Company (Nova Poshta, Delivery, SAT, etc.)
Export is possible
Complete documents for the Customs Service
Prices for the products are available upon request.
The request is sent to:
- by fax (045) 95-71216
- by mail email@example.com
When calculating the price takes into account the volume of the order and material expended.
Final price is determined after negotiations with Customer.