Mix rastvorny preliminary production limy plaster p / with
- Customer pickup,
- In detail
- Country of manufactureBelarus
- Type of useUniversal
- State of the materialDry mixture
- Purpose of the materialFor concrete
- Special featureWithout features
- Pre-packing- g
Scope: Limy sandy mix for plastering of dry rooms.
Preparation of the basis: The basis has to be cleared of dirt, the dust which are badly sticking to particles and is moistened with water. Any surfaces from a brick, and also the surfaces processed by other materials on a cement basis can be the basis. On a wall it is recommended to do strips in the form of a slanting grid.
Solution preparation: Solutions are the ready mixes which are not demanding any additional additives except water. To add clear water at the rate of 0,24 to dry mix. . . And carefully to mix 0,26 liters on 1 kg of mix depending on a desirable consistence.
Operating procedure: Solution napylyatsya on a basis or is applied manually with the help of a trowel or steel ruler. The steel pallet 30 cm wide is used at partial alignment, a ruler 80 cm long - at full alignment. Surplus of plaster is removed, then is again used. Thickness of one layer no more than 15 mm. In need of drawing more than 15 mm carry out plastering in two steps. Before drawing the second layer it is necessary to be convinced that the previous layer completely dried. The way of finishing depends on desirable category.
Consumption rate: At a thickness of layer of 1 mm - 1,2.. . 1,5 kg/sq. m.