SPRAYER BITUMEN EMULSION BS-500

Sprayer for bitumen asphalt emulsion is intended for a primer before the laying of asphalt, road repair, asphalt adjacent territory and also for filling joints and cracks. Intake of bitumen emulsion is carried out with a tank volume 500 l. , which installed directly to the device. The heating system allows to use bitumen emulsion in the cold weather. Type of gasoline engine is 4 stroke air - cooled. Equipped with flushing system - pump washing systems, hoses, bypass. You can connect a compressor to blow the system. Fitted purge system for quick purification for the whole system. There are hand - spray system and rear tire spray. Equipped with a temperature sensor.
Model BS - 500 characteristics:
Engine - HONDA
Engine power – 3.6 kw (4.8 hp. )
Fuel gasoline – A92 and above.
Fuel consumption – 1.4 liters \ hours.
Gear pump.
Torch power – 75 kw.
The operating pressure of the burner gas is – 1.
Recommended of the capacity – 27 liters gas cylinder.
The length of the hand sprayer rod – 4 m.
Spray bar length – 2.0 m.
The width of spraying by spray bar – 2.2 m. (9 nozzles of Italian origin).
The spraying rate of bitumen emulsion through hand sprayer – 4 l/m.
The spraying rate of bitumen emulsion through spray bar – 36 l/m.
Consumption of bitumen emulsion – 0.8 l/sq. m.
The amount of bitumen emulsion tank – 500 l.
Weight (without emulsion) – 350 kg.
Deadline – 14 days.
Warranty – 1 year.

Advantages:
4 - stage cleaning system system.
The power block can be detached from the frame and installed on a different transport platform.
Universal assembly system.
Pump system with the built - in filter for filling in/out the tank with bitumen emulsion .
Built - in heating system (gas propane burner).
Warranty 1 year.