Mechanical briquetting press PBU-080-900, productivity 900-1200 kg/h

Briquetting machine PBU - 080 - 900 for pressing agricultural waste is used to produce cylindrical briquettes of the "Nestro" type from vegetable raw materials. This type of press is the best option for briquetting waste from the main production with the lowest operating and production costs.

Shock mechanical press allows you to produce industrial and retail briquettes.

Raw materials - straw, reeds, wood, sunflower husks.

The kit includes - a briquette cooling line, a raw material dosing bin, a cooling unit for heating oil, cooling collets, a control panel.

Production time - 2 - 3 months

Terms of payment - 50% prepayment, 50% upon completion before shipment

Warranty - 12 months.

Shipment - Zhytomyr region, Berdichev, st. Semenovskaya, 116

Delivery - carried out by hired transport, transport of the customer

Personnel training, commissioning - 2 days (not included in the cost of equipment)

Benefits of cooperation:

• price from the manufacturer;
• individual approach;
• organization of delivery of equipment (not included in the price of equipment);
• demonstration of finished equipment in operation at Ukrainian production facilities.

Specifications

* equipped with a batcher bin with a volume of 3 m ³ and two - sided loading of raw materials into the pressing chamber.

The press produced by PE "Briquetting Technologies" has a number of advantages compared to analogues produced in Ukraine:  

1. More than 400 units of presses were produced in different modifications and performance

2. In the production of presses, imported components are used, such as a gear motor, an oil station, oil level sensors, frequency converters, filters, cuffs, oil and much more.

3. The possibility of equipping the press with additional options , such as a raw material sensor in the bunker, lengthening the cooling line, equipping the press with a hopper with a volume of 1.5 or 3 m / cu, installing a controller to control the press

4. Forced lubrication system, without the use of high - pressure hoses to supply oil to the working parts of the press - the advantage of this solution is that the press will not fail due to a break in the high - pressure hoses.

5. Lubrication system that prevents the press from starting without oil supply to the crank mechanism.

6. On the press shaft, the rolling bearings are replaced with bronze bushings  - this solution allows you to significantly increase the service life of the press before repair work and reduce noise during the operation of the press

7. The presses are equipped with an oil heating and cooling unit - the oil cooler allows you to keep the oil temperature not higher than 50 ⁰ C to maintain the quality properties of the oil during the operation of the press, oil heating up to 40 ⁰ C is designed to heat the press oil before starting at low temperatures

8. The presses are equipped with a collet cooling unit - used to remove excess temperature from the press collets. Necessary for briquetting raw materials with excess moisture.

OUR EQUIPMENT IS INCLUDED IN THE LIST OF MACHINERY AND EQUIPMENT FOR AGRICULTURAL COMPLEX, THE COST OF WHICH IS COMPENSATED FROM THE STATE BUDGET.