Technical characteristics
- Country of manufactureGermany
Description
Machine of deep drilling of LOCH
main Technical characteristics
| Continuous drilling from 2 to 40 mm | |
| Boring operations from 20 to 50 mm | |
| Thin boring from 20 to 50 mm | |
| Nakatny polishing from 20 to 50 mm | |
| Length of drilling is from 250 to 2000 mm | |
| Longitudinal movements, mm axis W from 0 to 500 | |
| Cross movement, axis X from 500 to 3000 mm | |
| Movement on height, mm axis Y from 300 to 1000 | |
| Max. working surface 1000x1000 to 2000x2000 (3000) mm | |
| Speed is from 300 to 9000 rpm | |
| Power is from 5,5 to 17 kW | |
| Fast movements from 0 to 7500 mm/min. | |
| Working giving from 0 to 1500 mm/min. | |
| Tank volume SOZH from 500 to 1500 l | |
| Productivity of the pump is from 1 to 150 l/min | |
| Giving SOZH from 1 to 150 bars |
- The main drive of a spindle is adjusted besstupenchato.
- Constant power on all range of speed
- The drive of giving is carried out via the adjustable servo-driver of alternating current
- The end face of a spindle is prepared for the special boss
- Rigid design of the carriage of a spindle with system of high-precision bearings
- System of guides carefully tempered and ground
- Giving SOZH is carried out through a spindle
| Parameters | Size. | from | to |
| Continuous drilling | mm | 2 | 40 |
| Boring operations | mm | 20 | 50 |
| Thin boring | mm | 20 | 50 |
| Nakatny polishing | mm | 20 | 50 |
| Drilling length | mm | 250 | 2000 |
| Longitudinal movements, axis W | mm | 0 | 500 |
| Cross movement, axis X | mm | 500 | 3000 |
| Movement on height, axis Y | mm | 300 | 1000 |
| Max. working surface | mm | 1000х1000 | 2000x2000(3000) |
| Speed | rpm | 300 | 9000 |
| Power | kW | 5,5 | 17 |
| Fast movements | mm/min. | 0 | 7500 |
| Working giving | mm/min. | 0 | 1500 |
| Tank volume SOZH | l | 500 | 1500 |
| Pump productivity | l/min | 1 | 150 |
| Giving SOZH | bar | 1 | 150 |
Contact the seller
Machine of deep drilling of LOCH
