Machine cleanup MZ-4M
- Customer pickup,
- Courier
- In detail
- Country of manufactureUkraine
The MZ-4M machine is intended for cleaning of single-core enamel wires of round section with a diameter of 0,3 - 2,5 mm from isolation at the length of 4 - 50 mm.
The machine consists of the following parts:
- drive,
- electronic regulator of speed of rotation of the electric motor,
- nozzle.
Technical characteristics
| Diameter of the smoothed-out wires, mm | 0,3. 2,5 |
| Maximum length of cleaning, mm | 50 |
| The maximum time of cleaning of the maximum length of a wire, with | 2,5-3 |
| Maximum effort of a conclusion of a wire, N (kgf) | 5 (0,5) |
| Approximate productivity, piece/hour | 540 |
| Engine capacity, W | 60 |
| Speed, rpm | 3000-15000 |
| Weight, kg | 0,9 |
| Overall dimensions | 66 x 236 |
| Supply voltage, In | 220kh50gts |
Principle of work
By pressing the button of the starting arrangement the electric motor turns on and brings a nozzle into rotation.
At rotation of a nozzle inertial shoulders of levers under the influence of centrifugal force disperse from the center in different directions. Opposite shoulders of levers at the same time meet to the center and, affecting knives, reduce them to the center and press to a wire with a certain effort.
The reduced knives, rotating, tighten against the stop the wire inserted into a nozzle. At extraction of a wire from a nozzle there is an isolation cutting. When using an emphasis length of the cut-off isolation is regulated ranging from 4 mm to 35 mm. For removal of isolation from a wire from 35 mm to 50 mm long instead of an emphasis the screw which is included in the package of spare parts is used.
The size of effort of pressing of knives to isolation is provided with the frequency of rotation of a nozzle which is provided, in turn, by the electronic regulator of speed of rotation of the electric motor.Equipment for production of electrohardware coils