- BrandTSM Ceramic
- Country of manufactureUkraine
- Тепло Гидро ШумоизоляцияДля теплоизоляции стен панелей из бетона,теплоизоляция с жароотражающими свойствами.Средство против конденсата как в помещениях,так и на трубопроводах водоснабжения холодной воды,теплоизоляция для паропровода.Жароотражающее гидроизоляционное покрытие от п
TSM Ceramic (TSM Keram_chny, TSM Ceramic) — modern technologies of thermal isolation. Material with heat conductivity of CE Certificate = 0.0017 W/mK
The key of unique heat-insulating ability of TSM Ceramic lies in its structure. TSM Ceramic are microscopic (0,02-0,1 mm) the hollow ceramic balls possessing exclusive properties both when heating, and when cooling which are in a suspension in the liquid composition consisting of synthetic rubber, acrylic polymers and inorganic pigments. This combination does material easy, flexible, extensible. Material possesses good adhesion to the covered surfaces. Material represents suspension of white color which after drying forms an elastic covering.
TSM Ceramic - simple and available thermal insulation.
The material TSM Ceramic is intended for receiving a covering on surfaces of any form and in the most hard-to-reach spots. TSM Ceramic can be put on metal, concrete, brick, wooden, plastic, rubber, cardboard and some other surfaces by means of a brush or an airless spray. The surface on which the structure is applied has to be pure, fat-free, without dirt and a rust.
Thickness of a technological coat layer is no more than 0,4 mm, time of drying from 12 to 24 hours. The period of curing of each layer from pass of the tool — 0,5 — 12 hours. A material consumption rate at a single-layer covering — 1 liter on 2 sq.m at a thickness of 0,4 mm.
The covering has a warranty of 10 years. The term of operation is over 20 years.
TSM Ceramic - anticorrosive material.
High rate of adhesion of TSM Ceramicpozvolyaet to isolate the covered surface from access of water and air, thereby, eliminating the potential of external corrosion and formation of a rust, unlike "wrapping heat insulators", polyurethane foam or mineral wool.
TSM Ceramic - environmentally friendly material which does not contain poisonous or harmful substances in the structure that allows to work with it in rooms without additional ventilation. Material has the hygienic conclusion of Ukraine.
TSM Ceramic - fireproof material which does not sustain combustion. The film 1,0 mm thick chars at a temperature of 500 °C and decays at a temperature of 840 °C, emitting carbon monoxide and nitrogen that promotes delay of distribution of a flame. Material conforms to requirements of fire safety, has the conclusions of fire laboratory of Ukraine: group of combustibility — G1 in accordance with GOST 30244-94 (slabogoryuchy on Construction Norms and Regulations 21-01-97), group of an inflammability — B1 in accordance with GOST 30402-96 (flame-resistant on Construction Norms and Regulations 21-01-97), smoking coefficient — D2 in accordance with GOST 12.1.044-89 (with moderate smoke-generating ability on Construction Norms and Regulations 21-01-9).