Lintel Crystal-20

The device automatic for determination of temperatures of crystallization and freezing (EXPRESS METHOD) (GOST 5066-91, GOST P 53706-2009, GOST 18995.5-73, ISO 3013, ASTM D2386-06)

The device Lintel the Crystal-20 according to MI 2418-97 "Classification and use of technical means of tests of oil and oil products" (are put into operation by the order of the Chairman Gosstandart of the Russian Federation No. 337 from 30.04.98g.) is means of tests. The device allows to test as light oil products, and anti-icing liquids according to requirements of standards. The device works in the automatic and manual modes.

AUTOMATIC FUNCTIONS OF THE DEVICE:

• automatic program fall of temperature of a product;
• automatic hashing of a product during test with the set speed;
• fixing and storing of temperature, beginning of crystallization (crystallization point), freezing point (crystallization);
• automatic fixing and storing of temperature of crystallization of pure hydrocarbons;
• temperature of the beginning of crystallization and temperature of freezing are defined by two ways: optical and on change of temperature of a product upon phase transition;
• the device builds schedules of temperature and transparency of a sample during test
• display of information on the course and results of test on the liquid crystal 4th lower case display;
• storing, possibility of viewing and the press through the serial port RS-232 to 300 results of tests;
• results of test can automatically be transferred from the device to the personal computer on a radio channel through a subsystem of the wireless interface "PBI Lintel-Link" which is got separately.

MANUAL MODE:

• continuous hashing of a sample during all test;
• cooling or heating of a sample at the command of the operator;
• sample illumination at visual observation;
• is defined visually and the multinational corporation and TZ at the command of the operator is fixed.

TECHNICAL CHARACTERISTICS:

1. Cell volume for ispytuyemy test: 8 cm3.
2. The minimum temperature of a cell (at a temperature of coolant plus 5 °C): minus 80 °C
3. Time of cooling of test up to the temperature minus 65 °C (at a temperature of coolant plus 10 °C), no more: 20 minutes.
4. Error of determination of temperature, no more: ±0,5 °C.
5. Coolant parameters:

• type - water;
• temperature - from plus 5 to plus 20 °C;
• expense - from 2 to 5 liters a minute.

6. Food parameters:

• tension (220+22/-33)B;
• frequency (50±1) of Hz;
• power consumption, no more: 300 BA.

7. Overall dimensions of the device, no more: 360х450х380 mm.
8. Mass of the device, no more: 15 kg.
9. Warranty period of operation of the device: 12 months.

COMPLETENESS:

THE GAGES RECOMMENDED FOR CERTIFICATION:

* the glass sensor with a length of sensor of 12 mm, 180 mm submersible part long and 4 mm with a diameter of submersible part; use of the glass sensor of other type is allowed;

** unit of the last category, °C.