Technical characteristics
- BrandЖаско
- Country of manufactureRussia
Description
It is intended for receiving an ekstrudat from grain mix by humidity to 14% and the crushed straw humidity to 30%.
TECHNOLOGICAL SITES
And - the Site of crushing
B - the Site of mixing
In - the Site of extruding
And - the Site of crushing
А.1. The bunker is zavalny
А.2. Straw grinder
А.3. Crusher of forages
B - the Site of mixing
Б.1. Horizontal single-shaft mixer
Б.2. Shnekovy conveyor
Б.3. Accumulative bunker
Б.4. Shnekovy conveyor
In - the Site of extruding
В.1. PE-1250U's press extruder
В.2. Shnekovy conveyor
В.3. Cooler of an ekstrudat
В.4. The case of management (is not shown)
Production technology of an ekstrudat
Grain is loaded into the bunker from where the shnekovy conveyor moves in a crusher. Straw is loaded into a crusher manually. The crusher serially crushes grain or straw.The crushed grain and straw in turn move in the mixer. The gathered doses on the set compounding mix up in the mixer, and via the open electric gate mix is unloaded in the bunker reception. From the bunker mix moves the shnekovy conveyor in a press extruder.
Received ekstrudat from an extruder by the shnekovy conveyor moves in a cooler, and after cooling with the shnekovy conveyor goes to a finished goods warehouse. Control of an extruder is exercised from own panel of an extruder.
Management of inclusion and switching off of shnekovy conveyors, change of size of their productivity, inclusion and switching off of the mixer is carried out from a case of management.
Technical characteristics
Productivity, t/days | to 24 |
Rated capacity, kW | 140 |
Height of a ceiling, m | from 5 |
Contact the seller
Line of extruding of straw and grain