Order for School furniture - Bench (Aditya JSD 601 A)

The request from the buyer:

od366714/2021_2022 : Supply deliver and place Trademark registered branded (JALARAM Make-JSD 601(D))/equilvalent Two Seater Desk Cum Bench fitted on tubular frame with perforated seat and back for Senior Students.<br>Overall size : H-760 × W-1040 × D-1000 (mm) <br>Seat Height: 460 mm Desk Top (Curvica) of 25 mm thick wood based high quality branded (TESA) post formed Pre-laminated Particle Board (PLB )with 0.6mm laminated with 2mm PVC beading by hot melt glue<br>process all over 4 edges. <br>Bench Main frame tube & Support tube of 32mm, 16swg ERW round tube. <br>Seat & Back frame tube of 19mm, 16swg ERW round tube. <br>Seat & Back support of 25x25x1.6mm (16swg) thick. square ERW tube. <br>Seat & Back of 18swg. Perforated CRCA sheet IS 513. <br>Storage Bucket of 18swg. Perforated CRCA sheet IS 513. <br>Good quality PVC shoes & cap. All steel parts will be epoxy polyester powder coated to the thickness not less than 50 microns finish after 10 tank anti-rust treatment and B grade phosphating.
od366715/2021_2022 : Supply, deliver and place of Trademark registered branded (JALARAM make- JMPT 4A) or approved equivalent Table for with 25 mm top, square tubular frame. Overall size: W-151 x D-90 x H-75(cm) Material Description: Main top 25mm thick wood based high quality Pre-laminated Particle Board(PLB) of TESA with 2mm PVC edge band by hot melt glue process for beading all over edge. Top frame of 1.21mm thick. (18swg) CRAC sheet IS 513. Table frame structure made up of prime quality MS ERW square tube 25x25mm of 18swg. Good quality PVC Shoes. All steel parts should be epoxy polyester powder coated to the thickness not less than 50 microns finish after 10 tank anti-rust treatment and B grade phosphating.
od366716/2021_2022 : Supply,deliver and place Trademark registered branded (JALARAM Make JEC 501(C))/Equivelent Executive Visitor Net Chair, <br>Overall Size (approx): H-98 x W-58 x D-63.5 (cm) <br>Seat Height: 48 (cm) <br>Frame structure: Backrest made of Mesh and Seat from hot mould plywood of minimum 12 mm thickness of ergonomic design to avoid back pain. Chrome-plated Arm & Frame 'Tapestry: Minimum average weight required 400 to 490 gms per sq. mtr. <br>Tapestry will be tested quality such as stain test, ultra violet test,glue test <br>and color fastening with average weight of 450 grams per square meter <br>Cushioning: PU foam having density of 50 kgs/m3 for seat. Average <br>thickness of foam not less than 50 mm + 10 mm Polly foam. <br>Arm rest material: Polyurethane on Chrome <br>Shoes: Nylon Rubber