Description
Labomid of M (analog of a labomid 203). For the submerged cleaning. Bags of 25 kg. delivery across Ukraine
Labomida brands "M" perfectly clear metallic surfaces of different mechanisms and units of operational dirt, the remains of fuels and lubricants, other fats by metal degreasing.
Features of application of a labomid
The main function of labomid of all brands is a fight against pollution of metallic surfaces of machines. Depending on a type of the polluted mechanism and nature of pollution choose this or that brand of a labomid. This technical detergent on brands differs in concentration of active agent and temperature condition of application that it is very important to consider at acquisition of labomid.
Storage conditions and transportations of a labomid
As a rule, labomid package in bags from paper and polyethylene 20-40 kilograms. However some producers pack labomid into a polyethylene container and one-time containers which can also provide reliable protection of this detergent during transportation or storage. As this non-toxic and nonflammable substance, does not exist some special, specific, conditions for storage and transportation of a product therefore standard recommendations are used.
Labomid allow to clear parts from ferrous and non-ferrous metals, including from aluminum.
Labomida or MS and fillers in the form of an uralit, a marble crumb, the crushed abrasive wheels) are located in the container to which the oscillating motion is reported.
Preparations Labomid represent mix of synthetic surfactants with inorganic alkaline salts in the form of white powder. Labomid-101 use in the form of aqueous solutions concentration 10 - 30 g/l in jet washers of jet type at a temperature of solution of 70 - 85 With, aqueous solution of Labomid-203 concentration of 25 - 35 g/l - at immersion washing and temperature of 80 - 100 Pages.
Detergents labomid - IOI and labomid-102 are used for jet cleaning of machines and parts, and labomid-203 and labomid-204 are recommended for degreasing by an immersion method. They are non-toxical, is nonflammable, the fire - and are explosion-proof, well soluble in water.
In jet machines apply powders Labomid 101, ML-51 and MS-6 as They do not form foam.
Means Labomid 101 Is applied to washing of permanently installed machines and an arable land (weight.
In recent years the synthetic washing preparations ML, Labomid, MS, etc. have gained distribution. The preparations ML-51 and ML-52 represent mix of surfactants with electrolytes: sodium salts of silicon and phosphoric acids. These preparations let out in the form of powder or granules of white and light yellow color. The preparation ML-51 use for jet cleaning of deposits at a solution strength in water 10 - 20 g/l, the preparation ML-52 - for cleaning of parts with boiling extraction of resinous deposits at concentration of 25 - 35 g/l with a temperature of solutions of 70 - 80 Pages.
Now more perfect washing means - Labomid, Speed, are developed and implemented by XC, MS, and also are applied the means developed on PPP.
The technology modes of application of preparations ML, NANOSECOND, labomid - IOI and labomad-102 for jet cleaning are given in tab. 2.
Labomid 102 is offered to wash the machines and machines which are not installed permanently by means of means (weight.
Good cleaning of polishing pastes is reached by washing of parts in the technical TMS-31, ML-51, ML-52 detergents, Labomid, De-talin, the Impulse, etc. Chemical degreasing by alkaline solutions and detergents proceeds at the increased temperature much quicker (60 - 80 C) as at the same time reactions of saponification and hydrolysis accelerate, mud circulation which promotes emulsification amplifies. Time of degreasing from 5 to 20 min. depending on nature of pollution and metal of products.
Good cleaning of polishing pastes is reached by washing of parts in the technical TMS-31, ML-51, ML-52 detergents, Labomid, Detalin, the Impulse, etc. Chemical degreasing by alkaline environments and detergents proceeds at the increased temperature much quicker (60 - 80 C) as at the same time reactions of saponification and hydrolysis accelerate, mud circulation which promotes emulsification amplifies.
Good cleaning of polishing pastes is reached by washing of parts in technical detergents: TMS-31, ML-51, ML-52, Labomid, Detalin, Impulse, etc. Chemical degreasing by alkaline solutions and detergents proceeds at the increased temperature quicker (60 - 80 C) as at the same time reactions of saponification accelerate, hydrolysis and the mud circulation promoting emulsification amplifies. Duration of degreasing is from 5 to 20 min. depending on nature of pollution and metal of products.
Good cleaning of polishing pastes is reached by washing of parts in technical detergents: TMS-31, ML-51, ML-52, Labomid. Detalin, Impulse, etc. Chemical degreasing by alkaline solutions and detergents proceeds at the increased temperature quicker (60 - 80 C) as at the same time reactions of saponification accelerate, hydrolysis and the mud circulation promoting emulsification amplifies. Duration of degreasing is from 5 to 20 min. depending on nature of pollution and metal of products.
Labomida brands "M" perfectly clear metallic surfaces of different mechanisms and units of operational dirt, the remains of fuels and lubricants, other fats by metal degreasing.
Features of application of a labomid
The main function of labomid of all brands is a fight against pollution of metallic surfaces of machines. Depending on a type of the polluted mechanism and nature of pollution choose this or that brand of a labomid. This technical detergent on brands differs in concentration of active agent and temperature condition of application that it is very important to consider at acquisition of labomid.
Storage conditions and transportations of a labomid
As a rule, labomid package in bags from paper and polyethylene 20-40 kilograms. However some producers pack labomid into a polyethylene container and one-time containers which can also provide reliable protection of this detergent during transportation or storage. As this non-toxic and nonflammable substance, does not exist some special, specific, conditions for storage and transportation of a product therefore standard recommendations are used.
Labomid allow to clear parts from ferrous and non-ferrous metals, including from aluminum.
Labomida or MS and fillers in the form of an uralit, a marble crumb, the crushed abrasive wheels) are located in the container to which the oscillating motion is reported.
Preparations Labomid represent mix of synthetic surfactants with inorganic alkaline salts in the form of white powder. Labomid-101 use in the form of aqueous solutions concentration 10 - 30 g/l in jet washers of jet type at a temperature of solution of 70 - 85 With, aqueous solution of Labomid-203 concentration of 25 - 35 g/l - at immersion washing and temperature of 80 - 100 Pages.
Detergents labomid - IOI and labomid-102 are used for jet cleaning of machines and parts, and labomid-203 and labomid-204 are recommended for degreasing by an immersion method. They are non-toxical, is nonflammable, the fire - and are explosion-proof, well soluble in water.
In jet machines apply powders Labomid 101, ML-51 and MS-6 as They do not form foam.
Means Labomid 101 Is applied to washing of permanently installed machines and an arable land (weight.
In recent years the synthetic washing preparations ML, Labomid, MS, etc. have gained distribution. The preparations ML-51 and ML-52 represent mix of surfactants with electrolytes: sodium salts of silicon and phosphoric acids. These preparations let out in the form of powder or granules of white and light yellow color. The preparation ML-51 use for jet cleaning of deposits at a solution strength in water 10 - 20 g/l, the preparation ML-52 - for cleaning of parts with boiling extraction of resinous deposits at concentration of 25 - 35 g/l with a temperature of solutions of 70 - 80 Pages.
Now more perfect washing means - Labomid, Speed, are developed and implemented by XC, MS, and also are applied the means developed on PPP.
The technology modes of application of preparations ML, NANOSECOND, labomid - IOI and labomad-102 for jet cleaning are given in tab. 2.
Labomid 102 is offered to wash the machines and machines which are not installed permanently by means of means (weight.
Good cleaning of polishing pastes is reached by washing of parts in the technical TMS-31, ML-51, ML-52 detergents, Labomid, De-talin, the Impulse, etc. Chemical degreasing by alkaline solutions and detergents proceeds at the increased temperature much quicker (60 - 80 C) as at the same time reactions of saponification and hydrolysis accelerate, mud circulation which promotes emulsification amplifies. Time of degreasing from 5 to 20 min. depending on nature of pollution and metal of products.
Good cleaning of polishing pastes is reached by washing of parts in the technical TMS-31, ML-51, ML-52 detergents, Labomid, Detalin, the Impulse, etc. Chemical degreasing by alkaline environments and detergents proceeds at the increased temperature much quicker (60 - 80 C) as at the same time reactions of saponification and hydrolysis accelerate, mud circulation which promotes emulsification amplifies.
Good cleaning of polishing pastes is reached by washing of parts in technical detergents: TMS-31, ML-51, ML-52, Labomid, Detalin, Impulse, etc. Chemical degreasing by alkaline solutions and detergents proceeds at the increased temperature quicker (60 - 80 C) as at the same time reactions of saponification accelerate, hydrolysis and the mud circulation promoting emulsification amplifies. Duration of degreasing is from 5 to 20 min. depending on nature of pollution and metal of products.
Good cleaning of polishing pastes is reached by washing of parts in technical detergents: TMS-31, ML-51, ML-52, Labomid. Detalin, Impulse, etc. Chemical degreasing by alkaline solutions and detergents proceeds at the increased temperature quicker (60 - 80 C) as at the same time reactions of saponification accelerate, hydrolysis and the mud circulation promoting emulsification amplifies. Duration of degreasing is from 5 to 20 min. depending on nature of pollution and metal of products.
Similar company products
Contact the seller
Labomid of M (analog Labomid 203)