Kromkooblitsovochny Filato FL-91B machine

Kromkooblitsovochny Filato FL-91B machine
Edge thickness: 0,4-3 mm, panel Thickness: 10-80 mm, giving Speed: 20 m/min.

Appointment:

It is intended for a veneering of rectilinear and curvilinear edges of furniture boards and preparations by natural strip and synthetic rolled material. Gluing is conducted at manual giving of preparation.

Supply of edging material in a zone of gluing is carried out automatically from shop.

Scheme of processing

Scope:

Is ideally suited for application at the enterprises for production of cabinet furniture (office, kitchen sets, sliding wardrobes, furniture for drawing rooms and halls, and also the exclusive furniture made by individual orders).

Distinctive features:

• Giving speed with smooth adjustment of 0-20 m / min-
• Tank for glue fusion with the electronic block of control of temperature -
• Two kleenanosyashchy shaft -
• The tank for glue under kleenanosyashchy shaft -
• Adjustment of amount of the applied glue -
• Guillotine for preliminary cutting of thick edging material from PVC or ABS, with max. section 3kh80mm-
• Clamping rollers quick-detachable in number of 4 pieces -
• Driving roller with smooth change of speed of giving -
• Hopper of the rolled edging material D600mm-
• The edge length counter -
• The control panel on the forward panel of the machine -
• Regulator of compressed air, masloraspylitel-

Design features

 - - - - - - - - - - - - - - - - - - - - - - - - - - Glue knot • - Two kleenanosyashchy shaft provide the best gluing of an edge. One shaft applies glue on a detail, the second shaft on an edge. Ideal option in case of use of a friable chipboard. • - Keeva a tank of 4 l. has the lower arrangement of rather kleenanosyashchy shaft. Surplus of glue flows down in a glue tank. Hit of glue on a desktop and units of the machine is excluded. • - Time of heating of glue of 15 min.

 -

• - Screw exact control of amount of glue on everyone provides to a shaft an accurate glue seam. • - adjustment on material thickness is not required. • - On glue the comb is established to a shaft which applies glue on an edge. The comb wrings out an edge from a kleenanosyashchy shaft, thereby prevents sticking of an edge to a shaft.

 -

 - - - - - - - - - - - - - - - - - - - - - - - - - - the Control panel • - the Control panel to be on the forward panel of the machine. It is carried out: inclusion and switching off of the machine - installation of temperature of glue - is the counter of length of an edge and adjustment of speed of giving. • - Change of the mode of processing from curvilinear details on rectilinear is carried out by means of the switch.

 -

 - - - - - - - - - - - - - - - - - - - - - - - - - - Knot of preliminary cutting of an edge from a roll (guillotine) Management of a guillotine happens automatically to the help of the trailer switch for rectilinear details or the counter of length of an edge for curvilinear details.

 -

• - the minimum allowance from each party of a detail Is reached. • - Significantly simplifies work of the operator on the machine

 -

 - - - - - - - - - - - - - - - - - - - - - - - - - - length Counter

 -

 - - - - - - - - - - - - - - - - - - - - - - - - - - the Hair dryer for a warming up kromk and • - Warm air is directed to an edge. The edge is warmed, to become elastic. Such edge well lays down on curvilinear surfaces. Does not spring and does not break on bends. The effect of a belyosost on sites of a bend of edging material is excluded. • - In cold time the heating of an edge excludes unsticking of an edge.

 -

 - - - - - - - - - - - - - - - - - - - - - - - - - - the Inclined table • - the Inclined table 0-45 hail. serves for gluing of an edge on angular end faces of details. Such details are used at production of furniture, hollow floors and wall panels.

 -

 - - - - - - - - - - - - - - - - - - - - - - - - - - the air preparation Block • - Consists of the regulator of compressed air, a masloraspylitel. • - the Block of preparation of air ensures stable functioning of all system and knots of the machine, protects elements of system from a souring.

 -

 - - -

Technical characteristics
Thickness of edging material	mm	0,4 - 3
Thickness of a detail, min./max.	mm	10 - 80
The minimum radius of curvature of the processed detail	mm	20
Desktop inclination	hail	0-45
Giving speed	m/min	0-20
Heating temperature	hail	0-250
General power	kW	1,93
The feeding tension	In	220
Pressure of compressed air	Bar	6,5
Overall dimensions – length	mm	1800
- width	mm	1120
- height	mm	1150
Weight	kg	335

 -

 - - - -

Technical characteristics
Thickness of edging material	mm	0,4 - 3
Thickness of a detail, min./max.	mm	10 - 80
The minimum radius of curvature of the processed detail	mm	20
Desktop inclination	hail	0-45
Giving speed	m/min	0-20
Heating temperature	hail	0-250
General power	kW	1,93
The feeding tension	In	220
Pressure of compressed air	Bar	6,5
Overall dimensions – length	mm	1800
- width	mm	1120
- height	mm	1150
Weight	kg	335

 -

 -

 -