설명
Fin Tube Welding Machine / Welding Part / 웰딩 파트 / 공구대
ⓐ High frequency current transformer : 240kw
ⓑ Moving table for high frequenncy transformer
- Up,down,left and right maximum stroke : 50㎜
- Up & down cylinder C,T Lift stoke : Maximum 100㎜
ⓒ Fin holder : Air cylinder type (Stroke 75㎜) : Air pressure 0~4 ㎏/㎠
ⓓ Tube tip holder : Air cylinder type (Stroke 100㎜) : Air pressure 0~5 ㎏/㎠
ⓔ Fin guide roller : Air cylinder type
ⓕ Spark detector : working distance 50㎜ ~ 500㎜
Respond speed 10 ~ 100msec
이것은 핀을 튜브에 용접하는 시스템으로서 핀튜브 냉각노즐, 고주파 출력 변압기, 변압기 위치를 조절해 주는 오르내리는 테이블, 핀가이드 롤러, 튜브 브레이크 롤러로 구성되어 있다. 핀을 튜브와 결합하거나 바꾸는 것을 용이하게 해주는 가이드 롤러는 효율성을 높이기 위해 에어 실린더 타입으로 되어있다. 핀이 파손되는 경우, 튜브와 출력 변압기의 파손을 최소화하고 예방하기 위해서 회전중인 튜브를 즉시 정지 시킬 수 있도록 스파크 감지기가 설치되어 있다.
It is the system for welding fin with tube and consists of cooling nozzle for fin tube, high frequency output transformer, up & down table for adjusting the position of transformer, fin guide roller and tube break roller with strong and stable systems. Guide roller which is easy to connect and change fin with tube is air cylinder type for more efficiency, There is a spark detector which is installed for rapid stop of rotating tube in case of fin break so as to minimize and prevent breakage of tube and output transformer. |
ⓐ High frequency current transformer : 240kw
ⓑ Moving table for high frequenncy transformer
- Up,down,left and right maximum stroke : 50㎜
- Up & down cylinder C,T Lift stoke : Maximum 100㎜
ⓒ Fin holder : Air cylinder type (Stroke 75㎜) : Air pressure 0~4 ㎏/㎠
ⓓ Tube tip holder : Air cylinder type (Stroke 100㎜) : Air pressure 0~5 ㎏/㎠
ⓔ Fin guide roller : Air cylinder type
ⓕ Spark detector : working distance 50㎜ ~ 500㎜
Respond speed 10 ~ 100msec
이것은 핀을 튜브에 용접하는 시스템으로서 핀튜브 냉각노즐, 고주파 출력 변압기, 변압기 위치를 조절해 주는 오르내리는 테이블, 핀가이드 롤러, 튜브 브레이크 롤러로 구성되어 있다. 핀을 튜브와 결합하거나 바꾸는 것을 용이하게 해주는 가이드 롤러는 효율성을 높이기 위해 에어 실린더 타입으로 되어있다. 핀이 파손되는 경우, 튜브와 출력 변압기의 파손을 최소화하고 예방하기 위해서 회전중인 튜브를 즉시 정지 시킬 수 있도록 스파크 감지기가 설치되어 있다.
- · 고주파 변압기 : 240kw
- · 고주파 변압기를 위한 이동 테이블
- - 상하, 좌우 최대 스트로크 : 50mm
- - 상하 실린더 C.T 리프트 스트로크 : 최대 100mm
- · 핀 홀더 : 에어 실린더 방식 (스트로크 75mm) 공기 압력 : 0 ~ 4kg/cm²
- · 튜브 끝단 홀더 : 에어 실린더 방식 (stroke 100mm) 공기 압력 : 0 ~ 5kg/cm²
- · 핀가이드 롤러 : 에어 실린더 방식
- · 스파크 감지기 : 작업 거리 : 50mm ~ 500mm 반응 속도 : 10 ~ 100m/초
Contact the seller
Fin Tube Welding Machine / Welding Part / 웰딩 파트 / 공구대
We recommend to see