- BrandНовосфера
- Country of manufactureRussia
PBM is designed for fine grinding, mixing and mechanical activation of solids and solving other technical problems. Our equipment allows to grind materials with a hardness of 6 Mohs, yielding a powder with a particle size of 5 microns or less. Mill equipped with a built aerodynamic classification step to provide at the output of a predetermined homogeneous powder dispersion.
Milling complex RVM - 600C
Grinding complex RVM - 600C is configured according to the scheme without air duct. Material fed into the grinding chamber from the raw material hopper using a screw feeder with adjustable output. The material enters the grinding chamber after passing through the magnetic separator stage. The raw material is ground in the grinding chamber of the rotary type with an adjustable degree of comminution. Crushed material is derived from grinding chamber by gravity. Collect the material can be arranged in a sealed container with a batch or continuous emptying.
Rotating the rotor creates air pressure. For air pressure relief for the mill chamber with a filter bag installed vibrovstryahivaniya system.
Control milling complex is carried out from the control cabinet.
Technical characteristics of the RVM - 600C
Characteristic |
Value |
Note |
Productivity, kg / h |
40 - 400 |
|
Installed power, kW |
22.7 |
|
The particle size of the inlet max, mm |
10 |
Feed screw feeder |
Mass, kg |
550 |
|
Mains voltage, V |
380 |
3p |