- BrandLida
- Country of manufactureBelarus
- Weight- g
- Color-
- PackagingTin can
- Consumption130 - 150 g/m²
- Drying time- min
Type: Adhesive LIDBOND D3 CL is an aqueous adhesive composition based on a dispersion of polyvinyl alcohol and polyvinyl acetate dispersion.
Application: Adhesive LIDBOND D3 CL forms colorless adhesive seam and intended for bonding: parts made of wood and wood - based materials (chipboard, MDF, OSB and others. ); in the manufacture of solid wood furniture panels; window and door frames; hard and exotic woods; finger joints; manufacturing ladders, boards and tile flooring, and others. The materials bonded by means of adhesive LIDBOND D3 CL can be used in premises with frequent short - term exposure to running water or condensate, and (or) high humidity. Outdoors - with protection from direct climatic influences.
Surface Preparation: The surfaces must be well otfugovany, cleaned of dust and grease. To obtain the optimum result is not earlier than 24 hours before gluing wood should pare. For bonding wood containing tannins necessary to skilled gluing, because the adhesive in contact with tannins timber and iron wood color can be changed.
Coating: Adhesive must be thoroughly be stirred before use. The adhesive applied in a thin uniform layer of the roller applicator machines, manually brush or roller. Wood moisture content must be 8 - 12% . Glue is applied to one surface in the most critical cases (for details, hardwood, while requiring increased water resistance) - to both surfaces. The adhesive may be used at a temperature in the glue line from plus 15 ° C to plus 80 ° C. It is not allowed to conduct bonding at a temperature below 15 ° C.
Open time at a temperature (20 ± 2) ° C and a relative humidity of 65% is not less than 11 minutes, depending on temperature, humidity, hygroscopic material, amount of the applied adhesive and internal stresses in the material.
For lamella gluing pine recommended pressing time is 3 - 6 minutes at a temperature (20 ± 2) ° C and a relative humidity of 65% .
Bonding of other wood species than pine bonding at various bonding temperatures or under high voltage designs require that the pressing time was determined in each particular case.
The necessary pressure for gluing - 0.1 - 1.0 MPa. Careful vystrugivanie and bringing the surfaces into intimate contact ensures the highest quality of gluing. Machining the bonded parts is recommended after 24 hours. The final adhesive strength characteristics acquisition occurs within seven days after bonding.
Consumption of adhesive to a single layer coating - 130 - 150 g / m2, depending on the bonding object absorbency of the wood.
Upon completion of work the container and tools were washed with warm water until the glue dries.
Usage data is indicative, as bonding efficiency depends on many factors. To clarify the conditions of bonding should be carried out pilot tests in specific production conditions.
Precautions: from the surface of the skin adhesive wash with soap and water.
Transportation: GOST 9980.5.
Storage conditions: hold glue in closed warehouses at ambient temperature from + 6 ° C to plus 30 ° C. Avoid direct sunlight. The product is fire and explosion - proof.