- Country of manufactureRussia
- Car makeMitsubishi
The joint venture FUSO KAMAZ Trucks Rus Ltd. created OJSC "KAMAZ" and Mitsubishi Fuso Truck and Bus Corporation (MFTBC) to manufacture and sell trucks in Russia Japanese Mitsubishi Fuso.
Truck Mitsubishi Fuso Canter demonstrates a high level of functionality thanks to its versatility and skilful use of valuable space. This remarkable capacity and capacity has been achieved thanks to the cockpit layout of the engine compartment.
Specifications | The base unit Mitsubishi Fuso Canter |
---|---|
External body dimensions, LxWxH (mm) | 4300 . . . 6200 |
Top panel |
Sandwich panel 80 mm, consisting: - Galvanized sheet coated RAL 9003 - Insulation Stiropen 50 - Galvanized sheet coated RAL 9003 |
Front Panel side panels rear doors |
Sandwich panel80 mm comprising: - Galvanized sheet coated RAL 9003 - Insulation Stiropen 50 - Galvanized sheet coated RAL 9003 |
Bottom |
Sandwich panel 100 mm - Floor covering fiberglass with quartz grit |
subframe | - The carrier spars connected by crossmembers U - shaped cross section, with the developed lateral support spars in the front and rear of the subframe and with improved lateral support |
Doorway | - Aluminum profile made of elastic rubber petals, interchangeable. |
van framing | Outside - aluminum profile. Internal - aluminum profile + baffle strip of corrugated aluminum sheet in the front, side walls, doors 300 mm |
insulation |
Stiropen - 50 |
Accessories, hardware |
FurgoCar (Italy) |
Dimensions vans
Dimensions vans, LxWxH (mm) | ||||
Minimum | 4300h2200h2000 | 5100h2200h2000 | 5500h2200h2000 | 6000h2200h2000 |
Standard | 4600h2200h2200 | 5400h2200h2200 | 5800h2200h2200 | 6200h2200h2200 |
Maximum | 4600h2600h2500 | 5400h2600h2500 | 5800h2600h2500 | 6200h2600h2500 |
Specifications Mitsubishi Fuso Canter
main | ||||
Modification | FE85DE | FE85DG | FE85DH | FE85DJ |
Axels | 4x2 | |||
cab type | 3 - seater, without bed | |||
Weights (kg) | ||||
Gross vehicle weight | 7500 | |||
Curb weight of chassis | 2775 - 2820 | |||
duty chassis | 4680 - 4725 | |||
Technically permissible front axle load | 2880 | |||
Technically permissible load on the rear axle | 5200 | |||
Overall dimensions, mm) | ||||
Length | 5975 | 6655 | 7130 | 7565 |
Width | 2135 | |||
Height | 2250 | |||
Wheelbase | 3410 | 3870 | 4170 | 4470 |
rear overhang | 1420 | 1640 | 1815 | 1950 |
Front track | 1665 | |||
Rear track | 1660 | |||
Engine | ||||
Model | MITSUBISHI FUSO 4M50 - 7AT7 | |||
Environmental class | Euro 3 | |||
Type of | Diesel, inline, 4 - cylinder, turbocharged, four - stroke, direct fuel injection, with water cooling, and heater plugs, volume - 4899 cm3 |
|||
maximum capacity (KW (hp) / r / min) |
110 (150) / 2700 | |||
Maximum torque (N • m / rev / min) | 471/1600 | |||
Fuel tank | ||||
Volume (L) | 100 | |||
suspension type | ||||
lobby | Dependent, spring, with hydraulic telescopic shock absorbers | |||
Rear | Dependent, spring, with hydraulic telescopic shock absorbers | |||
bus | ||||
Size, load index | 7.50 R16 - 12PR, 121/120 | 225/75 R16, 121/120 | 215/75 R17,5, 124/123 | 205/75 R17,5, 124/122 |
other features | ||||
Maximum speed (km / h) | 104 | |||
safety devices | ||||
Rear underride guard | present | |||
Sideguards | Hard aluminum profile | |||