- BrandСКБ Парус
- Country of manufactureUkraine
- Weight150 kg
- Packaging materialPaper
- Input Voltage- V
Installation is intended for packaging of the pile of napkins of 240х110х70±10 mm in size (on the sample) with covering by the film like PVD or PND.
The operating mode - the semiautomatic device, performance is up to 10 up. / min.
Benefits of the semiautomatic device of packaging of napkins:
- Performance improvement of process of packaging of napkins in comparison with manual packaging;
- Compact sizes;
- Possibility of accomplishment of the automatic machine under necessary package sizes;
- Regulation of time and temperature of the zapayka
Picking of basic model
- Rulonoderzhateli 1;
- Pusher with the handle 3;
- Press (squeezes foot to packaging razmet) 4;
- Control unit 5.
- Pusher with the pneumatic cylinder 6;
- Zapayechny device 7;
- Frame 8.
The description of work of the semiautomatic device for packaging of napkinsBefore work availability of the film on rulonoderzhatel 1 is checked, the film is stretched through system of rollers and the ends of the film are accustomed to drinking creating the integral tape of two rolls.
The operator stacks necessary foot of napkins on the loading little table which is executed in the form of two sidewalls 2 and the pusher with the handle 3, and taking for the handle of the pusher moves foot of napkins to the working area under the press 4. After foot of napkins got under the press 4, the operator takes away the pusher with the handle 3 in the starting position and presses the start button on the control unit 5. On pressing of the button work the press 4, squeezing napkins for the subsequent movement, and the cylinder of the pusher 6 which moves foot of napkins out of limits of the zapayechny device 7 through the film. Further the clip 9 presses foot of napkins in the film to the table of the frame 8, than creates necessary package size, and the pusher returns to the starting position. The press 4 rises and falls to the same time of the traverse of the zapayechny device 7, creating the packaging seam, cuts off it from the tape and comes back then the clip 9 rises. Forming of the seam happens heating of the nikhromovy thread and partial pro-melting of the film in the place of contact traverses of the zapayechny device and its lower part. Further packaging gets on shipment by pushing through of the subsequent packed napkins.
Technical characteristics of basic model of the semiautomatic device:
- Execution of the device floor
- Package size, мм240х110х70±10
- Working pressure, Mpa0,4 ….0,6
- Sizes, mm, no more: 2000х2000х1500
- Weight, kg, not bolee150
- Service personnel, persons 1