Installation for air and plasma cutting of Jasic CUT-100

The Jasic CUT 100 installation is intended for air and plasma cutting of all types of metals and alloys up to 40 mm thick. With manual movement of a plasmatron. Compact and small-sized device. Connection 380B.

Jasic CUT 100 - the device of invertor type (with manual movement of a plasmatron) for air and plasma cutting of various metals and alloys in industrial conditions.

The device is very simple in use, has the small weight and dimensions that in turn does work with the device very convenient.

The most compact and small-sized device from all model range of invertor devices for plasma cutting. The inverter will allow to carry out as rough cutting, and more equal. The basic purpose of the device Jasic CUT 100 is an air and ardent cutting of metals of all types and their alloys. Undoubtedly purity of a cut on small thickness of metal will satisfy even the most exacting buyers. Purchase of this inverter for car service, for metal working and small production of a metalwork is possible. Use of compressed air in the course of work provides high degree of safety.

Guarantee for the welding machine: 1 (one) year from the producer + post warranty service.

The device of the Jasic CUT 100 series is intended for air and plasma cutting of all types of metals and alloys. It is applied to cutting of carbonaceous steel, stainless steel, various alloys of steel, copper, aluminum and other non-ferrous metals. It is made on the basis of modern invertor technology. Thanks to powerful MOSFET transistors and to application of the principle shirotno - pulse modulation (), the straightened network tension (100 Hz) will be transformed to a high-frequency alternating voltage (100 KHZ) which moves on primary winding of the power transformer. Then, on a secondary winding the alternating high-frequency voltage which will be transformed now to constant turns out. Such principle of work allows to use the power transformer considerably of the smaller size that leads to increase in efficiency of the device and reduction of its weight.

For excitement of an arch the built-in oscillator generating a high-voltage, high-frequency impulse of tension is used.

This device differs in stable, reliable and effective work, the small sizes and low noise level in the course of cutting.

Main advantages of Jasic CUT 100:

1) Low energy consumption in comparison with transformer types of installations of air and plasma cutting.

2) Smooth adjustment of current of cutting.

3) Digital indication of current of cutting.

4) Contactless ignition of an arch (built-in oscillator).

5) Existence of protection against an overload and overheat.

6) Cutting of the color and high-alloyed metals and their alloys.

7) High efficiency, due to change of frequency and use of MOSFET transistors.

8) Maintenance of current of cutting at the set level is not dependent on length of a network cable, and also on fluctuations of a power line.

In comparison with gas manual cutting air and plasma cutting has the following advantages:

• high speed and high quality of a cut at the minimum expenses;

• cutting of the polluted and painted surfaces without preparatory work;

• lack of deformation and need of editing are sharp later;

• the minimum losses of materials when cutting;

• small subsequent processing for welding and assembly operations after cutting;

• insignificant operational costs.