Currency EUR
Installation flow-mesuring pouring VS80 – NPC In-Teh, OOO |
Buy Installation flow-mesuring pouring VS80
Installation flow-mesuring pouring VS80

Installation flow-mesuring pouring VS80

In stock
13495.58 EUR
Ukraine, Kiev
(View map)
Display phones
Technical characteristics
  • BrandVS
  • Country of manufactureUkraine
  • Plant manufacturerООО "НПЦ Ин-Тех"
  • Profile250х110х170 cm
  • Voltage220/380 V
  • Measurement range0,03-40,00 куб.м/час "
  • Type of controlElectromechanical
  • Operating pressure0,1 MPa

Pouring flow-mesuring installation of the VS80 series, calibrations, adjustments and definitions of errors of the flowmeters, counters of liquid, converters of an expense (volume) of liquid of various type (turbine, electromagnetic, ultrasonic, vortex, etc.) including which are a part of heat meters are intended for checking.

Automation of processes of installation of the testing modes, removals and processings of indications provides high efficiency and a faultlessness, does not demand from personnel of high qualification and constant control over installation work.

Installation allows to carry out setup of devices in the dynamic mode, displays the current errors of the calibrated devices. It gives the chance to quickly estimate operability of devices in the course of calibration that considerably saves time spent for calibration and checking.


The software delivered in a set allows to form the database on types of devices and methods of their checking, protocols of checking, devices, with instructions of owners and terms of the following checking.

Main technical and operational characteristics

  • Working liquid - tap water with a temperature from +15 to +35 °C.
  • Range of the reproduced expenses of 0,03-40,0 m3/h;
  • Limits of a relative error of installation:

-  ± 0,3% in the range of working expenses (a secondary standard, electromagnetic flowmeters);

-  ± 0,1% at measurement of weight in the range of working expenses (primary standard, scales).

  • Checking performance method:

- checking in  the range of expenses from 0,03 m3/h up to 40,0 m3/h

- static weighing in the range of expenses from 0,03 m3/h up to 40,0 m3/h;

  • Du of the bringing pipelines - 80 mm.
  • Adjusting length of the bench - 600 mm (two branches).
  • Standard sizes of the installed devices – Du 15, 20, 25, 32, 40, 50,65, 80.
  • The number of at the same time installed devices – from 1 to 10 (depending on a standard size).
  • The mechanism of fastening of devices – mechanical with the manual drive;
  • Installation and regulation of testing expenses – elektr. latches
  • Modes of tests:

- "start feet" without stopping stream;

- "start feet" with a stream stop.

  • Parameters of the feeding electric network:

- tension  - 380(±38) V

- frequency  - (50 ±1) Hz;

- power consumption  - to 7,5 kW;      

  • System of water supply  – a reverse tank of 400 l.;
  • Overall dimensions (basic): 2700 mm x 2190 mm x 1100 mm.;
  • A lot of installation – 350 kg without water.
  • Material of pipelines, a flowing part of pumps, tanks -  food stainless steel.
  • Middle service life  - 12 years.
  • Room space (at placement on one platform) - 14  sq.m                                              

Delivery set


  • The pump station with system of deaeration of liquid with a productivity from 0,03 to 40,0 m3/h;
  • Bench of Du 15-80;
  • Tank of reverse water supply of 400 l;                           
  • Block of reference flowmeters (range of expenses of 0,03-42,5 m3/h);
  • The weight measuring device (scales, the switching device, tank)
  • Set of adapters for installation of counters of water with Du 15, 20, 25, 40 - muftovy, Du 50, 65 - flange.
  • Software.
Contact the seller
Installation flow-mesuring pouring VS80
Installation flow-mesuring pouring VS80
by the goods
Your message must contain at least 20 symbols. The message must not be more than 2000 symbols.
Obligatory field is not filled
The field is wrongly filled
The field is wrongly filled
Shipping method
ClearSelected items: 0