- Country of manufactureRussia
Fast - hardening waterproofing repair compound for the elimination of active leaks!
Instructions and descriptions: APPLICATION: a fast - hardening waterproofing compound designed to eliminate water leaks in concrete and stone; urgent repair of reinforced concrete water tanks; elimination of leaks under pressure through the concrete body in basements, etc. quick fixing of anchor bolts, dowels, plumbing, etc. , waterproof joints, repair of concrete surfaces. Can be used for outdoor and indoor use.
The uniqueness of this material lies in the fact that 15 - 30 minutes after application it already has sufficient strength and water resistance for reliable waterproofing of the structure.
DESCRIPTION: the material is a dry mixture based on special cements, plasticizing additives and fractionated quartz sand. When mixed with water, it forms a fast - hardening sealing compound. Closed with water at the place of work.
Extend a hole, crack or seam to a depth of 2 to 3 cm and a width of 2 cm. Rinse or clean to remove any dirt.
PREPARATION OF THE COMPOSITION AND METHOD OF APPLICATION:
The repair compound is applied in quantities that can be used within 30 - 60 seconds.
To seal holes, cracks, the composition is sealed with water at the rate of 150 - 250 ml per 1 kilogram of dry mixture and mixed to the consistency of plasticine. In cold weather or to accelerate the hardening process, the composition is mixed with hot (30 - 40 ° C) water.
The fast - hardening waterproofing compound is applied with a spatula or by hand. You can only work with rubber gloves. Press firmly into the prepared hole and hold until completely cured, then remove excess.
Shelf life in a dry room - 6 months from the date of production.