(View map)
- BrandKazstanex
- Country of manufactureChina
[max L? W? H 800? 400, engine capacity is 5,5 kW]
The hydraulic ploskoshlifovalny machine possesses, the thought-over design, structure of good rigidity, and also to good appearance and convenient simplicity of operation. In hydraulic machines of the 7th degree of accuracy it is used (P4 - level) the bearing in a spindle which gives high precision of processing of products.
In the machine it is used as the automated tic and a manual transmission.
The manual and automated transmission with system of realization of longitudinal movement of a desktop is used.
The machine hydraulic ploskoshlifovalny is used for polishing generally of all types of a flat surface, and also difficult surfaces by means of the maximum pointed abrasive.
In structure holders with a constant electromagnet or a magnet are delivered.
Technical characteristics: | |||||||||
Technical parameters | Measurement unit. | MY820 | |||||||
Max. amount of preparation (earth) (Д×-Ш×-В) | mm | 520×-220×-390 - | |||||||
Length of max. area of grinding | mm | 530 - | |||||||
Width of max. area of grinding | mm | 220 - | |||||||
Distance from a table surface to the center of a spindle | mm | 450 - | |||||||
Way of movement | - | V-type rail with a steel sphere | |||||||
V-type rail with a steel sphere | kg | 200 - | |||||||
Size of a table (Д×-Ш) | mm | 480×-220 - | |||||||
Number of T-slots | мм×-N | 12×-1 - | |||||||
Speed movement of a desktop | m/min | 3 - 23 - | |||||||
Cross giving on a flywheel | mm | 0.02/graduation 2.5/turn | |||||||
Vertical giving on a flywheel | mm | 0.01/graduation 1.25/turn | |||||||
Wheel size (to dia. ×-shirina×-otversty) | mm | 200×-20×-31.75 - | |||||||
Spindle speed | 50 - | rpm | 2850 - | ||||||
0 - 6000 - | |||||||||
Spindle motor power | kW | 1.1 - | |||||||
Power of the motor of hydraulic station | kW | 1.5 - | |||||||
Working pressure | MPa | 3 - | |||||||
Max. productivity | l/min | 18 - | |||||||
Power of the cooling motor | kW | 0.4 - | |||||||
Size of the machine (Д×-Ш×-В) | mm | 1680×-1140×-1760 - | |||||||
Size of the container (Д×-Ш×-В) | mm | 1630×-1140×-1960 - | |||||||
Gross/net | tons | O.85/0.75 - |
-
Technical characteristics: | |||||||||
Technical parameters | Measurement unit. | MY820 | |||||||
Max. amount of preparation (earth) (Д×-Ш×-В) | mm | 520×-220×-390 - | |||||||
Length of max. area of grinding | mm | 530 - | |||||||
Width of max. area of grinding | mm | 220 - | |||||||
Distance from a table surface to the center of a spindle | mm | 450 - | |||||||
Way of movement | - | V-type rail with a steel sphere | |||||||
V-type rail with a steel sphere | kg | 200 - | |||||||
Size of a table (Д×-Ш) | mm | 480×-220 - | |||||||
Number of T-slots | мм×-N | 12×-1 - | |||||||
Speed movement of a desktop | m/min | 3 - 23 - | |||||||
Cross giving on a flywheel | mm | 0.02/graduation 2.5/turn | |||||||
Vertical giving on a flywheel | mm | 0.01/graduation 1.25/turn | |||||||
Wheel size (to dia. ×-shirina×-otversty) | mm | 200×-20×-31.75 - | |||||||
Spindle speed | 50 - | rpm | 2850 - | ||||||
0 - 6000 - | |||||||||
Spindle motor power | kW | 1.1 - | |||||||
Power of the motor of hydraulic station | kW | 1.5 - | |||||||
Working pressure | MPa | 3 - | |||||||
Max. productivity | l/min | 18 - | |||||||
Power of the cooling motor | kW | 0.4 - | |||||||
Size of the machine (Д×-Ш×-В) | mm | 1680×-1140×-1760 - | |||||||
Size of the container (Д×-Ш×-В) | mm | 1630×-1140×-1960 - | |||||||
Gross/net | tons | O.85/0.75 - |
-