The hydraulic guillotine of NG6G.01, production of LLC YuUMZ (patent No. 138365), is intended for direct longitudinal and cross cutting of sheet material. THIS MODEL CAN be EQUIPPED with the ChPU SYSTEM!
Cutting of metal is made for one course of a knife on a marking or an emphasis. Scissors are operated in the enclosed space or in the open air, at ambient temperature from-25 C to +40 C. Convenience in work, the lowered noisiness, high quality of a cut and reliability of hydraulic guillotine scissors, and also various options of a complete set, allow to operate this equipment in productions with high requirements to quality of the equipment. Control of control of operation of scissors is exercised from the panel, the working course from a pedal. The electric circuit ensures functioning of scissors on the single and automatic courses. To order accessories of import production can be installed (OMRON, SIEMENS, BOSSH, etc.)
Change of a gap between knives, happens due to change of a corner of a cross inclination of a knife beam with the back, top bearings installed on the eccentric shaft connected by a bar. At rotation of shaft there is an increase or reduction of a tilt angle. The mechanism of adjustment of a gap consists from two-level the motor reducer and is operated knopochno, from the control panel.
The hydraulic system of a guillotine is simple, does not demand high qualification from service personnel. The hydraulic scheme of scissors is universal. Depending on model of hydraulic scissors on the hydrounit electric motors and different productivity oil pumps can be installed only different power.
This production has no analogs of the Russian production! The patent belongs to LLC YuUMZ!
The description of the ChPU systems installed on guillotine hydraulic scissors of LLC YuUMZ
Basic complete set of NG6G.01 | Additional equipment NG6G.01 |
---|---|
1. The panel on a bed 2. the desktop equipped with the built-in ball support 3. frontal extenders of a desktop with a lateral line of 1000 mm 4. forward lateral emphasis 5. standard back motorized emphasis 6. trellised protection of a zone of a cut of metal 7. the electronic counter of the courses, indications on the control panel screen; 8. push-button management of a longitudinal inclination of knives for more convenient cut of metal of different thickness is on the panel; 9. manual adjustment of gaps between knives a steering wheel with information output on a lateral scale. |
|
Comparative and technical characteristics of model
Models | Leaf thickness at σвр ≤ 50 kgfs/mm | Tilt angle of a mobile knife | Pump productivity, l/min |
Al. engine of the main drive | Quantity of cuts in a minute | Weight, kg | Management of the working course | Dimensions, mm | ||
---|---|---|---|---|---|---|---|---|---|---|
min | max | kW | rpm | |||||||
NG6G.01 | 0.3 | 6.3 | 0.3 ° -2 °45' | 25 | 7.5 | 980 | 10-12 | 4700 | foot pedal | 3100х1550*х2050 |
NG13G.01 | 1 | 13 | 0.5 ° -2 °45' | 63 | 15 | 960 | 10-12 | 7200 | foot pedal | 3100х1620х2110 |
NG16G.01 | 1 | 16 | 0.5 ° -2 °45' | 63 | 18.5 | 960 | 10-12 | 8400 | foot pedal | 3100х1720х2420 |
NG20G.01 | 1 | 20 | 0.5 ° -2 °45' | 100 | 30 | 960 | 10-12 | 12300 | foot pedal | 3100х1930х2510 |
NG25G.01 | 1 | 25 | 0.5 ° -2 °45' | 30 | 960 | 10-12 | 16800 | foot pedal | 3100х1930х2510 | |
NG32G.01 | 1 | 32 | 2.0 ° -4 °45' | 40 | 960 | 10-12 | 22000 | foot pedal | 3100х1930х2710 |