- Country of manufactureRussia
The cost of products is calculated individually, depending on the configuration, equipment configuration and customer requirements.
Macpresse Europa is one of the most renowned international companies among the manufacturers of waste and recycling presses. The company has been run by the Scotuzzi family since 1875, the year of its foundation. Today it is present in more than 50 countries around the world with a wide network of service centers. The machines are manufactured in three of our own factories in Milan, Italy, where the general and operational management is also located: the covered area is 17,000 square meters out of a total area of 270,000 square meters.Main settings
|Pressing force||95 tons|
|Carriage specific pressure||11.5 kg / cm2|
|Cycle time||12 sec|
|Cycles per minute (without material)||5|
|Volumetric performance||465 m³ / hour|
|Performance depending on the density of the loaded material||PET - 7 t / h, Paper - 22 t / h|
|Installed power of the main engine||75 kWt|
|Bale dimensions (WxHxL)||1100x750x (adjustable length)|
|Bale weight depending on material density||300 - 600 kg|
|Number of rows of strapping wire||4|
|Hopper dimensions||1020x1800 mm|
|Bale chamber volume||1.55 m³|
|Press dimensions (LxWxH)||9950x5050x3860 mm|
|Internal lining with Hardox sheets||Yes|
|Press weight||22 t|
MAC 107/2 is the latest model from the / 2 series.
Some characteristics of the previous press have been improved: the screed and extrusion channel have been strengthened, the counter - pressure cylinder has been increased. As a result, the density of the bale is increased by 30% for cardboard and 15% for plastic. Bale size 110 x 75 cm.
The control panel allows you to better control the operation of the press: to adjust production parameters - pressure and back pressure, bale length, etc. The infographic system allows real - time diagnostics.
HARDOX wear linings are bolted to the brake duct and seal box and can be easily replaced. This system protects the machine from abrasion and corrosion.
The cutting blades are highly efficient, hardened and interchangeable depending on the material being cut.
The horizontal strapping system is designed to bind with both plastic and steel wires. This system provides greater operator safety. Maintenance is carried out at floor level.