Holders of safety locks (fusible inserts) of DVP, DP, DPV, DPB, DPK, MDP

The holder of safety locks (fusible inserts) of the DVP, DP, DPV, DPB, DPK, MDP series – the device intended for fastening on panels and inclusions of a safety lock or a fusible insert in a chain of direct or alternating current with a force of 0,15-10A with tension to 600B. Cases of holders of DVP, DP, DPV, DPB, DPK, MDP are produced from a heat-resistant synthetic reaktoplast – the karbolit (it bakelit) maintaining temperature range from -60 °C to +85 °C. The case consists of several folding parts in which the safety lock or an insert fusible, depending on overall dimensions is established. Simultaneous installation only of one safety lock or insert is possible. Wires fasten to contact conclusions of holders by means of the soldering. Most of holders are fixed in an opening on the panel by means of a nut, and holders of the MDP1-1 series by means of two screws, holders of the DPB and DPB-T series – an adjusting ring. The minimum time between failures of the provided holders makes not less than 10 000 hours, and the possible number of change of fusible inserts reaches 400 times. Holders of DVP, DP, DPV, DPB, DPK, MDP are applied to installation on the panel of safety locks or fusible inserts with various overall dimensions – Ø4×15 of mm, Ø5,2×20 of mm, Ø6,3×30 of mm, Ø7×30 of mm, Ø7,2×30 of mm, Ø7×45 of mm, mm Ø8×50. General characteristics with the indication of the applied safety lock, the overall and adjusting dimensions of holders of the DVP, DP, DPV, DPB, DPK, MDP series appear in the table. Interpretation of marking of holders is given below. The guarantee of work of the holders of the DVP, DP, DPV, DPB, DPK, MDP series delivered by our enterprise makes 2 years. It is supported with the relevant documents on quality. The price on holders of the DVP, DP, DPV, DPB, DPK, MDP series for safety locks or inserts fusible is formed depending on necessary quantity of goods, delivery time and opportunities of payment. Holders of safety locks of DVP, DP, DPV, DPB, DPK, MDP of Soprotivleniye of contact, no more than 0,005 Ohms the Electric durability of isolation of 1500 Veff Soprotivleniye of isolation, the Range of working temperatures of -60 °C – +85 °C of the Photo the Price Applied Series a safety lock current tension the sizes the DVP4-1 series (karbolit) not less than 100 megohms at the request of 0,25 – 5 And 250 V of Ø4×15 of mm of VP1-1, VP1-1V, (karbolit) ceramic 4×15 DVP4-1 (plastic) at the request of 0,25 – 5 And 250 V of DVP4-1V at the request of 0,25 – 5 And 250 V of DVP4-2 at the request of 0,16 – 10 And 250 V of Ø5,2×20 of mm of VP2B-1, VP2B-1V, VP2T-1Sh, VPB6-1... 13, VPT6-1. . 13, S1014, S1020 DVP4-2 (import) at the request of 0,16 – 10 And 250 V of DVP4-2V at the request of 0,16 – 10 And 250 V of DVP4-2V (import) at the request of 0,16 – 10 And 250 V of DVP4-3 at the request of 1 – 10 And 250 V of Ø7,2×30 of mm of VP3B-1, VP3B-1V, VP3T-1Sh, VP3T-2Sh, VPB6-23... 26, VPT6-14... 23, PK-30, PTs-30 DVP4-3V at the request of 1 – 10 And 250 V of DVP4-4 at the request of 1 – 10 And 250 V of Ø6,3×32 of mm of VPB12, VPT3 DVP4-4V at the request of 1 – 10 And 250 V of DVP6 at the request of 0,16 – 10 And 250 V of Ø5,2×20 of mm of VP2B-1, VP2B-1V, VP2T-1Sh, VPB6-1... 13, VPT6-1... 13, S1014, S1020 DVP7 at the request of 0,16 – 10 And 250 V of Ø6,3×32 of mm of VPB12, VPT3 DVP7 (import) at the request of 0,16 – 10 And 250 V of DVP8 (with a spring) at the request of 0,16 – 10 And 250 V of Ø8×50 of mm of VPB6-27... 42, VPT6-27... 34 DVP8 (without spring) at the request of 0,16 – 10 And 250 V of DVP8-1 (with a spring) at the request of 0,16 – 10 And 250 V of DP1-M at the request of 0,16 – 10 And 250 V of Ø5,2×20 of mm of VP2B-1, VP2B-1V, VP2T-1Sh, VPB6-1... 13, VPT6-1. . 13, S1014, S1020 DP1-TsM at the request of 0,16 – 10 And 250 V of DPB at the request of 0,25 – 5 And 250 V of Ø4×15 of mm of VP1-1, VP1-1V, ceramic 4×15 DPB-T at the request of 0,25 – 5 And 250 V of DPV at the request of 1 – 40 And 250 V of Ø4×15 of mm the Self-repairing Ø4×15 DPK1-1 safety locks at the request of 0,15 – 5 And 250 V of Ø7×30 of mm of PK-30, PTs-30 DPK1-2 at the request of 0,25 – 5 And 600 V of Ø7×45 of mm of PK-45 MDP1-1 at the request of 0,15 – 5 And 250 V of Ø4×15 of mm of VP1-1, VP1-1V, ceramic 4×15 Marking of holders of safety locks of the DVP series: DVP of 4 - 4 V of DVP – the holder's Series: DVP - the holder of an insert fusible. 4 – Holder's type. 4 – Standard size of an insert fusible. In – Vseklimatichesky execution. Marking of holders of safety locks of the DP series (option 1): DP 1 - Ts M DP – the holder's Series: DP - the holder of a safety lock. 1 – Way of fastening: screws or under a metal nut. C – With the digital index of tension of a network. M – Small-sized. Marking of holders of safety locks of the DP series (option 2): DP B - DP T – the holder's Series: DP - the holder of a safety lock. B – the Kind of a design: B - for high-speed safety locks, In - vertical. T – the Climatic modification: T - tropical climate. Marking of holders of safety locks of the DP series (option 3): DP K of 1 - 2 DP – the holder's Series: DP - the holder of a safety lock. To – With a round tip. 1 – Way of fastening: screws or under a metal nut. 2 – Kind of a design.