High Quality Human Corpse Cremation Machine

No.

Title

Specifications

Remark

1

Overall Dimension(mm)

L×W×H=8400×2350×2500

2

Trolley Counter Size(mm)

L×W×H=2120×680×700

3

Chamber Dimension（mm）

2150×700×700

4

Automatic Loading Counter

2

Optional

5

Fuel

light diesel, gas, natural gas, liquefied gas

6

Oil Consumption(Liter/corpse)

4(On Average)

Top

Perfor -

mance

In

cremation

Industry

7

Average Burning Time (min/corpse)

25 - 40mins(On Average)

8

Build - in Cooling Chamber

yes

9

Average Cooling Time(min/corpse)

4 - 15mins(On Average)

10

Hearth Burning Temperature

700～900℃

11

Hearth Burning Pressure（Pa）

- 2Pa～ - 50Pa

12

Total Machine Weight（t）

25tons

13

Ejector Fan（kw）

7.5

14

Blower Fan（kw）

7.5

15

Smoke Exhaust Emission

Reach the State Environment Standard

16

Covered Area Requirement

16 Square Meters

17

Ash Quality

Fully burnt, White Color Without Impurities

18

Determination of Odor

Cremation Room no Odour, No Smoke

19

Equipment Performance

Environment Protection and Energy saving, Low Noise, Low Vibration

20

Operation and Maintenance

Convenient Operation and Maintenance

No.

Title

Specification

Remark

1

Refractory Material

The refractory material of the hearth is Yashan, a well - known Chinese top brand. The top cover of the hearth is made of prefabricated high - alumina refractory bricks. The hearth is made of new high - strength anti - erosion aluminum carbonized silicon composite material, which ensures that the temperature in the hearth rises quickly and the shorten the cremation times and lower the fuel consumption. The refractory bricks and refractory cement for the furnace body are all made of high - quality material with high compressive strength, fast heat absorption, good thermal insulation, corrosion resistance, high stability, wear resistance and long service life. After a long period of high working temperature, it will not loosen and take off automatically, and the temperature resistance up to 1400 degrees.

2

Insulation Material

High - quality aluminum silicate fiber felt board, calcium silicate board and diatomite thermal insulation brick are in use with high quality thermal conductivity, so keeping the surface temperature of the furnace body about 20°C . Good thermal insulation performance, long service life, the furnace temperature only drop about 40°C after the Cremator stop working 24 hours.  

3

Decoration Materials

Using 0.8 - 1.0mm high - quality stainless steel plate with characteristic of corrosion resistance, convenient disassembly and assembly, convenient maintenance, and no deformation.

4

Trestle

Using high quality profiles and sheets, durable and no deformation

5

Main Combustion Chamber

After entering the main combustion chamber, the corpse are automatically ignited by the burner for incineration.

Main Furnace Chamber Structure

6

Fume Combustion Chamber

Combustion of flue gas , make the flue gas stay longer in the furnace and make the toxic and harmful substances fully burnt, achieving the environmental protection.

7

Main Furnace Masonry

The joint of brick is less than 3mm

No.

Title

Specification

Remark

1

Preparation Door System

Preparation door control system is automatically controlled by a computer equipped with an LED display to ensure the operation of the two sets of operating systems in the front and back halls. Equipped with a high - grade color LCD touch screen for easy operation, using a micro motor to drive the reducer to hydraulically control the preparation door to open and close automatically. The exterior decoration is made of high - quality special - grade stainless steel plate, which is elegant, sound - proof and noise - reducing.

2

Cooling Chamber

The ashes need to be entered into cooling chamber after incineration. The cooling chamber use the convert fan to cool down the ashes. When the temperature is lower than the ash picking temperature, the a Alarm rings automatically to inform the operator and shorten the waiting time.

Cooling System

3

Heat Collector

A new type of hot air heat ex - changer made of high strength, corrosion resistance, high temperature and high manganese 310S stainless steel material is put in the furnace to provide oxygen temperature. It has the advantages of high heat transfer efficiency, good heat absorption and fast temperature rise. It can rapidly raise the air temperature to over 400 C, so as to achieve combustion support, enhanced combustion, energy saving and consumption reduction, accelerate incineration speed and shorten the cremating time.

4

Burning System

Using high - quality energy - saving burner, it can automatically ignite, automatically control the furnace temperature and pressure, control fuel consumption, automatically perform electric damper adjustment, adjustable combustion angle, and adjustable smoke gate

5

Computer Control System

TFT color LCD touch screen and can achieve synchronous display of color and video animation. Special computer control (PLC) of cremator with fault diagnosis display and perfect protection function. It is equipped with three operating systems without interference switching: manual, semi - automatic, Fully automatic control.  The system is safe, stable and reliable. It’s  convenient for maintenance, and equipped with automatic explosion - proof function.

Control System

6

Electrical Components

Using high - quality low - voltage electrical components, using pressure module and temperature module to automatically detect furnace pressure and temperature

7

Electrical Control Cabinet

Separate electrical control cabinet, equipped with electrical protection functions such as overload and short circuit, and comprehensive system control functions.

8

System Operating Voltage

380V±5% (Three phase five wire system)

9

Electrical Control

 Operating Voltage

220VAC，24VDC

10

Wind Path

Made of new type of high temperature resistant and high manganese stainless steel material with corrosion resistance, high stability and high compressive strength.

Air Supply System

11

Air - Blower

Pulse blower system. The blower uses 7.5 kW high pressure blower with air volume of 1050 - 1200 m3/h and air pressure of 10000 - 12500 PA.

12

Combustion Supporting

 air duct

The small air duct at the end exposed to high temperature is made of high temperature resistant φ20 * 2.5 seamless pipe. The rest are made of φ159 steel pipe, which is resistant to high temperature and corrosion.

13

Ejector Fan

Venturi ejection system. The fan uses 7.5 kW High Pressure and high volume fan, air volume 3650~4200m3/h and wind pressure 4000~6000pa.

Smoke

Exhaust system

14

Ejector Liner

Made of high quality stainless steel with high temperature resistance and long service life.

15

Ejection Chimney

Made of 3mm thick stainless steel plate.  The first section buried underground. Jet structure, high temperature and corrosion resistance, and the height of the chimney is 8 - 12 meters.

16

Flue Structure System

The flue adopts refractory bricks, thermal insulation bricks, aluminium silicate fiber felt board, waterproof reinforced concrete protective layer and waterproof performance to ensure long - term non - leakage.

17

Pressure Control System

Using the controller to control the gate lifting, automatically adjust the furnace pressure keep the range between - 2 ~ - 50pa

18

HD Camera

High - definition camera is used to capture smoke emission for operating.

Monitor

System

19

Color Display

In order to ensure the best combustion emissions and easy adjustment and operation, the device uses a color display to dynamically display the outdoor smoke emissions.

20

Fuel Tank

Using steel profiles and plates, the capacity meets fire protection requirements.

Oil Supply System

21

Oil Tube

The pipeline from the fuel tank to the burner is wrapped with sealing tape to prevent oil leakage

22

National Standard

Micro Flow - meter

Measure fuel consumption and control oil distribution pipeline

23

Control Valve

control the fuel distribution and flame size.