- ManufacturerКомпания РиМ (RiM), ООО
- Country of manufactureRussia
- ColorWhite
- Wattage30 W
Heating cable "RIM" with a capacity of 30 W / m is a worthy solution for heating the ground in greenhouses, roofs, gutters, doors.
The "heart" of the cable is its heating element, made of constantan alloy, which ensures good thermal conductivity of the cable and helps to save energy. The heating element of the cable is laid in a German - made insulating silicone sheath around two current - carrying conductors, which makes it possible to mount equipment near hazardous environments and in adverse weather conditions (for example, in frost, due to a wide range of operating temperatures).
RIM manufactures heating cables on a state - of - the - art automated line controlled by just one engineer, which makes it possible to produce large quantities of cables in short periods of time.
Heating cable "RIM" of various power (for example, 30 W / m) can be produced in special coils from 50 to 200 m, which allows, by cutting off the required footage, to carry out installation directly on site.
THE FIRST METER OF ANY LINE REMAINS COLD!
Application area:
Heating of the ground in greenhouses, heating of doors, roofs, metal and plastic pipes and gutters.
High - temperature heating cable RIM can be used for refrigeration equipment (defrosting, defrosting, condensate drainage), to provide comfortable heating in residential premises. For anti - icing systems on the roof; for protection from snow, icing and freezing in open areas; to protect metal pipes from freezing, to heat the ground in greenhouses and greenhouses. The cable has a minimum bending radius of no more than 1 mm, thanks to which it can heat even the most complex geometric structures. The maximum temperature for heating the cable in the open air is 85 degrees Celsius.
Heating cable RIM 30w has silicone insulation, does not break and does not crack in the cold, it can be operated at temperatures from - 60 to + 200 degrees Celsius, and for a short time it can withstand heating up to + 300 degrees. The silicone sheath allows the cable to be used in destructive environments: in frost, heat, water, oils, acids.
Heating cable RIM 30w has energy consumption 40% lower than that of analogs, due to the use of CONSTANTANE as a heating element. Constantan is a heat - stable alloy based on copper (about 59% ) with the addition of nickel (39 - 41% ) and manganese 1 - 2% (Mn). The alloy has a high specific electrical resistance (about 0.5 μOhm x m), a minimum value of the temperature coefficient of electrical resistance, a high thermoelectromotive force in combination with copper, iron and chromium.
ATTENTION: when using thermal insulation, pay attention to its temperature limits!
Calculation of heating cable length - Download formula
A type: resistive Heating element: constantan wire Application:- For metal pipes
- For plumbing
- For sewerage
- For underfloor heating
- For heating doors
- For soil heating
- For heating containers
- For heating the air conditioner drain
- For refrigeration technology
