Grain separator with the ISM 20 cyclonic and sedimentary camera

Separators grain with a cyclonic and sedimentary complex of the closed type.

Now it is more and more given attention to emission of the polluted air in the atmosphere. It concerns also grain processing complexes. To separate grain by cars with a productivity from 10 tons per hour whatever was a multicentimetric dust layer on tens of meters around a separator, it is necessary to do in addition or a sedimentary chamber for collecting dust, or the cyclone chamber or a chamber of aspiration. Let's disassemble each chamber separately to understand their shortcomings.

Sedimentary chamber. To use a sedimentary chamber, the big room is necessary that is not always possible or convenient. In a sedimentary chamber it is impossible to achieve full cleaning of dust.

Cyclone chamber. It is projected only for a certain volume of air. That is, in the cyclone chamber there has to be only one certain pressure. In case of pressure difference in the cyclone chamber, the mode of separation is broken, so, and the level of quality of separation decreases.

Aspiration chamber. Represents system of forcing of dirty air via filters. Such way purifies air better, than the last ways, but very expensive in operation. Filters constantly become soiled that leads to the regular compelled stop of process of separation for their cleaning, and over time become useless. Still such way of purification of air demands big expenses of the electric power.

We can offer you the only option of the solution of this problem, besides the most favorable from the point of view of energy consumption. It is a grain separator with a cyclonic and sedimentary complex which does not release the polluted air into the atmosphere. Its efficiency = 100%. There are no analogs in the market.

Its basic purpose - to clear and calibrate grain and seeds and to collect garbage without emission it in the atmosphere.

The volume of the processed air - 10000 m3 an hour. The car has two sedimentary chambers in the closed cycle and cyclonic osadachnuyu a chamber.

Principle of action of a separator.

In the closed cycle through trays in the mode of injection 10% of volume of air from created by the fan get. Other 90% undertake from surrounding space. The air arriving from the fan together with injection gets to a cyclonic and sedimentary chamber where on a turn of an air stream to the fan at the expense of inertial forces emission of the polluted air in the same volume is made, as at injection. emission is made in a cyclonic and sedimentary chamber in which cleaning is made for 80%. The remained tertiary treatment of air within 15 - 18%% happens in the first sedimentary chamber in which the remained dust on channels drops out in a cyclonic and sedimentary chamber. All stream of air, going on the fan again, passes through the second sedimentary camera where the last dust precipitates (1,5% - 2%). Thus, we completely purify air of dust.

that gives ISM TsOK of the closed type?

Advantages:

- EFFICIENCY = 100%.

- Clears enough and collects dust from grain crops.

- Improves quality of separation due to reduction of turbulence of a stream in a separation chamber (more laminar stream).

- Sound insulation (in similar separators of open type noise level is made 87 dB, in closed - 57 dB) is improved.

- Provides subdrying of grain due to aerodynamic heating of air in the closed cycle for 3% - 5% in comparison with atmospheric air.

- the separator can work as indoors, and on the street, at the same time keeping internal climate identical. As the closed cycle works, in a cycle during the work temperature is constant, there is no influence from out from change of humidity and density of air.

- Residual kinetic energy of air comes back to the fan and provides economy of energy resources for 30% that on our separators allows to save on electricity consumption significantly. It gave us the chance to put engines the power not of 3 kW, but only 2,2 kW who to you will save the electric power.

Guarantee - 2 years.

Simplicity of a design and control, in operation and maintenance; high reliability and durability; profitability.